Versions Compared

Old Version 1

changes.mady.by.user goofy.liu

Saved on

compared with

New Version Current

changes.mady.by.user goofy.liu

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Import Macro Repair

Table of Contents

This is Blue tooth Test Jig & Test Topology.

See following (Fig 01) and remind you...

Fig

...

 Info

01


Image Modified

...

(#)Comment
(1)GND

...

(2)

...

PIO11 Pin, to short with (1)
(3)Jig's COM Port

...

Side to Host / PC
(4)

Jig's Main Board Side Power Supply from USB Port

of Host / PC or from USB Adapter.

(5)

if (4) is Power ready, this LED indicates the Jig

Power

...

ON


02

Image Added

(#)Comment
(1)

Enzytek BLE Golden SPS , as Test Jig

(2)DUT - BTPay Mini, USB Connected, To Host / PC
(3)USB Power Supply (to USB Port or Adapter)
(4)COM Port, To Host / PC
(5)(Wake Up Button) of DUT
(6)

BLE Indicator of DUT.

LED Blinking Behavior as the following

  1. Long Period ON/ Short OFF = Scanning
  2. Short Period ON/ Long OFF = Connected

Note 01: NO PIO11 Pin is required since New Data Mode Command "^^^<CR>" for disconnection is ready.

Note 02: Tx / Rx Pairing depending on (4) RS-232 Cable Tx / Rx pins has been exchanged.

03

Test Environment, Concept Fig.

Image Added


Ref Link : Blue tooth Test Info


(FIg 01)


Step-by-step guide

  1. The DUT (BTPay Mini) must keep in USB connection to PC.

  2. To plug (4) to another PC usb interface to provide Enzytek BLE SPS_C Jig Power,

  3. To check (5) indicator On,RED
  4. To connect (3) to PC COM Port for TS performing AT Commands to the Jig.
  5. PIO 11 short :

...

  1. Short (1)

...

  1. and (2) immediately

...

  1. then OFF the link  while TS asking to short "PIO 11" Pin.
  2. How to investigate DUT's blue tooth address ?

...


Info
  • Warn that PIO 11 PIN can't contact to any power source path or pins

...

Related articles

Filter by label (Content by label)
showLabelsfalse
max5
spacesTWRD
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ( "ts166" , "sps_c" , "btpaymini" , "enzytek" , "bluetooth" ) and type = "page" and space = "TWRD"
labelsbluetooth Enzytek SPS_C TS166 BTPayMini

Page Properties
hiddentrue


Related issues



BT Test Android App

VersionDateComment

VP3300_BLE_Test.apk


 

  • For New BLE Chipset since Enzytek OOB the elder one.

  • User Guide

    Image Added


Bluetooth Fixture/Jig Test

ItemDateComment

Example 01

Jig Test Log

 

See the attachment

View file
name01-HostMode-999-V2.txt
height400