ID TECH has had to update the lightning connector component on iMag Pro II due to the previous connector going end-of-life. During the validation of the new connector, ID TECH found that certain legacy iOS revisions were not able to work with the pass-through charging feature of the device. Below is a chart indicating which revision of the iMag Pro II are affected, and which iOS versions are supported for each: iMag Pro II Part Number & Revision | iOS version that supports pass-through charging | IDMR-AL30133 Rev J (and below) | iOS 9.3.5 and above | IDMR-AL30133 Rev K (and above) | iOS 12.4.5 (and above) |
|