...
- Open the USDK Demo app from the Windows Start menu.
- Connect the VP3300 or VP8300 to your PC via USB or serial port.
- Open the USDK Demo app from the Windows Start menu.
- Under Device, select Update Device Firmware, then click Execute Command.
- Navigate to and select the v1.05 firmware file you downloaded earlier and click Open.
- The device reboots and enters the bootloader, at which point the USDK Demo app begins updating the device.
- When the firmware update completes, the device reboots again and the USDK Demo app prints Firmware Update Successful in the Results
| Note |
|---|
When the v1.05 update completes, all four LEDs on the front of the VP3300 or VP8300 flash on and off. This behavior is normal and indicates you can perform the update to v1.10. |
Updating VP3300 and VP8300 Firmware to v1.10
...