Versions Compared

Version Old Version 6 New Version 7
Changes made by

Chris Barton

Chris Barton

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Open the USDK Demo app from the Windows Start menu.
  2. Connect the VP3300 to your PC via USB or serial port.
  3. Open the USDK Demo app from the Windows Start menu.
  4. Under Device, select Update Device Firmware, then click Execute Command.
  5. Navigate to and select the VP3300 firmware file you downloaded earlier and click Open.
  6. The VP3300 reboots and enters the bootloader, at which point the USDK Demo app begins updating the device.
  7. When the firmware update completes, the VP3300 reboots again and the USDK Demo app prints Firmware Update Successful in the Results