Page Comparison

...

1. unzip the firmware package. In the zip file, there should have a file named "Augusta_V_XX.fm.
2. In the "commands" box , click on  "device"→ "update device firmware" and then click "execute Command":
   Image RemovedImage Added
3. A file selection box should open. Select the desired Augusta firmware and click "open":
   Image RemovedImage Added
4. After opening the firmware file, the uDemo should begin the firmware update process. Please allow about 2-3 minutes for the firmware update to complete:
   Image RemovedImage Added
5. After the firmware update succeeds, please unplug and re-plug in the Augusta. 

...

1. unzip the firmware package.
2. Open Bootloader: With the Augusta plugging into a USB port, run the "IDTechBootload.exe" file in the firmware package. It should look something like this: 
   1. Image RemovedImage Added
3. Load firmware file: click "load firmware file". A file system dialog box should pop up with the corresponding firmware (.fm) file. Select the firmware file you want to load and click "open" (image a). After successfully loading the firmware file, the file info box should be populated with firmware information (image b)
   1. Image RemovedImage Added
   2. Image RemovedImage Added
4. Start Bootloader: Click the "Bootload' button (image a). The result box should now say "Bootload Enter Okay" and a progress bar should appear (image b)
   1. Image RemovedImage Added
   2. . Image RemovedImage Added
5. Finish Bootloader: after a few minutes, the results box should read "Bootload Succeeded!"
   1. Image RemovedImage Added

To enable Quick chip on the Augusta after a firmware update, please read this article: 

...