Page Comparison

...

Here is a breakdown of the Set Character Delay command, and it was originally a SecureMag PS/2 feature.  This command (or similar) should work for the SecureMag Family and it's successors. (SecureHead, SecuRED, SecureKey, SREDKey, Augusta)

For Augusta:

• If QuickChip Transaction mode & USB-KB interface (Support Supports EMV L2 & MSR function , Support per NGA Protocol), using use "Set Character Delay" Command (NGA Protocol: Command Body is 73 53 01 12 01) to Setting
• If Standard Transaction mode & USB-KB interface (Support Supports MSR function only , Support per ITP Protocol), using use "Set Character Delay" Command (ITP Protocol: Command Body is 53 12 01) to Setting

For V1.01.014
If QuickChip Transaction mode (USB-KB interfact) (Support EMV L2 & MSR function, Support NGA Protocol), using "Set Character Delay" Command (NGA Protocol: Command Body is 73 53 01 12 01) to Setting

Where:
0x30 - Delay 1.2ms (Default)
0x31 - Delay 2ms
0x32 - Delay 5ms
0x33 - Delay 10ms
0x34 - Delay 20ms
0x35 - Delay 50ms
0x36 - No Delay