K81 - fix(NEO3-2478): Get SAM1,2,3 ATR fail reader auto disabled ICC passthrough mode
RT1050 - fix(NEO3-2312): fix 90-33 turn off led and green camera led in activated/deactivated mode
### Known issues:
- TE-1286: DVT test for VP6825 FW v1.00.072.2231/ Ext v1.00.033.2231.T
### Notice : If using DVT build platform(V1.00.053T), Please update RT1050 bootloader for support 32MB disk space
VP6825 FW v1.00.078.2233.T
VP6825 Ext v1.00.034.2233.T
K81 - Feat(NEO3-1615): K81 Create Security DT and Project DT - fix(NEO3-2104): Fix get battery voltage unstable - fix(NEO3-1615, NEO3-2107): Fix device tree bug - fix(NEO3-1722):EMVCTL2_TransResultsRetrieve skips getting DFEE26 and DFEE12
RT1050 - feat(NEO3-2330): RT1050 reset K81 when bringup - fix(NEO3-2091): fix incorrect data length in IDG response for error cases - fix(NEO3-2135): 62-05 shall return 0x08 for timeout - fix(NEO3-2168): when transaction finish let TAL_IDLE to handle welcome msg
### Known issues:
- TE-1286: DVT test for VP6825 FW v1.00.072.2231/ Ext v1.00.033.2231.T - HWVP6825-28: Power On ICC + Get ATR_FAIL - HWVP6825-29: SAM cards test FAIL
### Notice : If using DVT build platform(V1.00.053T), Please update RT1050 bootloader for support 32MB disk space
VP6825 FW v1.00.073.2232.T
VP6825 Ext v1.00.033.2232.T
K81
- fix(NEO3-931, NEO3-2128, NEO3-2129): fix camera and qr failed 0x0A return code
- fix(NEO3-2135): 62-05 shall return 0x08 for timeout
K81 - Feat(NEO3-1615): K81 Create Security DT and Project DT - Feat(NEO3-2002): Create Secure log for tamper Trigger - Fix(NEO3-727): A command which can recognize the flash brand inside the reader - fix(NEO3): merge Visa branch - feat(NEO3-1055): support 32-03 command - feat(NEO3-1217): vp6825 support 62-02, 62-03, 62-04 and 62-05 - fix(NEO3-1740, NEO3-1741, NEO3-1742, NEO3-1743): improve codes for tamper event display in response of c7-3a command & internal get sr, ter, ier, cr of dryice and tamper source - Fix(NEO3-727): Support IDG Command 90-13 17 to recognize the flash manufacture ID - feat(NEO3-1673): support vp6825 get pin procedure
RT1050 - feat(NEO3-1136): implement Wi-Fi SSL Connection Request command - feat(NEO3-1397): implement config file to WIFI Get/Set Network commands - feat(NEO3-1624): get bluetooth name (IDG + GUI) from config file
### Known issues:
- NEO3-1718: Deactivated Mode reader LCD should displayed "Deactivated "and Beepered - NEO3-1974: Read CT fails easily when send 0240 3 interface ACT then insert C
### Notice : Please update RT1050 bootloader for support 32MB disk space
K81 - Support bootloader v1.06 - fixed FWE-1446 : AP6800 system and load certificate/key unstable issue
RT1050 - fixed NEO3-640: show up the white screen after booting - fixed NEO3-981: initialize audio driver causes 1050 reboot - fixed NEO3-1500: bluetooth pairing crash - fixed NEO3-1173: LTE Stack not enough lead to RT1050 reboot - fixed HWVP8810-36: audio/camera kthread doesn't delete completely - fixed NEO3-645/NEO3-1566: wifi test failed using DHCP - fixed NEO3-1421: load cert will make 1050 rebooting - fixed NEO3-1599: VP8810P(LTE) 1050 keeps rebooting - fixed FWE-1696: M Core app integration
### Known issues:
- none
VP6825 FW v1.00.068.2228.T
VP6825 Ext v1.00.031.2228.T
K81 - Support bootloader v1.05 - turn on SECURE_LOG
RT1050 - fixed NEO3-622: keeps rebooting in bared board - fixed NEO3-646: RT1050 LED Test, the wrong response - fixed HWVP8810-34: make audio file which larger than 128K bytes work
### Known issues: - FWE-1696: M Core app integration - NEO3-981: initialize audio driver causes 1050 reboot - NEO3-640: show up the white screen after booting - NEO3-645: wifi test failed using DHCP - NEO3-1173: LTE Stack not enough lead to RT1050 reboot - HWVP8810-36: audio/camera kthread doesn't delete completely - NEO3-1421: load cert will make 1050 rebooting
Date
Version
Package
Note
VP6825 FW v1.00.066.2226.T
VP6825 Ext v1.00.030.2226.T
K81 - Fix(NEO3-541): Fix SPI communication collision when 61-01 packet sent to rt1050 actively
RT1050 - support NGA Protocol - feat(MFT-939): add support to downloadable qr_app
### Known issues: - FWE-1696: M Core app integration - NEO3-617: core/appmngr are unstable or can not get the response or reboot RT1050 - NEO3-622: keeps rebooting in bared board - NEO3-640: show up the white screen after booting - NEO3-645: wifi test failed using DHCP - NEO3-981: initialize audio driver casues 1050 reboot
VP6825 FW v1.00.060.2224.T
VP6825 Ext v1.00.029.2224.T
K81 - support bootloader v1.05 - support for MFi - fix(NEO3-973): fix the issue where device Crash if leave CTLS card on unit w/ multi transaction. - fix(NEO3-972): fix the issue where the behavior of beeper and LCD message is incorrect when doing MSR transaction with mutli-interface. - fix(NEO3-793): Reader can not read the VISA card in Sony Xperia 10 Google Pay
RT1050 - support NGA Protocol - feat(MFT-939): add support to downloadable qr_app
### Known issues: - FWE-1696: M Core app integration - NEO3-617: core/appmngr are unstable or can not get the response or reboot RT1050 - NEO3-981: initialize audio driver casues 1050 reboot - Load Certificate & Key unstable(SPI issue)
VP6825 FW v1.00.056.2222.T
VP6825 Ext v1.00.028.2222.T
RT1050 - support NGA Protocol - fixed NEO3-646: RT1050 LED Test, the wrong response - fixed NEO3-645: wifi test failed - fixed NEO3-622: keeps rebooting in bared board - fixed NEO3-642: LCD & Touch Test will cause RT1050 rebooting - fixed NEO3-640/MFT-961: show up the white screen after booting - fixed NEO3-641: not communicate smooth talk with K81 - Need to update the RT1050 bootloader(Maximum 32 MB code space)
### Known issues: - FWE-1696: M Core app integration - NEO3-617: core/appmngr are unstable or can not get the response or reboot RT1050 - FWE-1630: color balance has some problem - Load Certificate & Key unstable
K81 - support K81 bootloader v1.03(Expand timeout to 60s) - [NEO3-486]fixed: NFC exchange hangup on specific card
RT1050 - Add all-new core app
### Known issues: - FWE-1696: M Core app integration - NEO3-617: core/appmngr are unstable or can not get the response or reboot the 1050 - NEO3-622: keeps rebooting in bared board - FWE-1630: color balance have some problem - NEO3-646: RT1050 LED Test, the wrong response - NEO3-645: wifi test failed - NEO3-642: LCD & Touch Test will cause the 1050 rebooting - NEO3-641: not communication smooth to talk with K81 - NEO3-640: show up the white screen after booting - No DKI. (No NGA protocol) - Need to update the RT1050 bootloader(Maximum 32 MB code space)
VP6825 FW v1.00.053.0000.T
VP6825 Ext v1.00.026.0000.T
### Release Notes:
K81 - Modify SAM card support slot number to 4
### Known issues: - No DKI. (No NGA protocol) - [FWE-486]NFC polling hangup when using MIFARE_CLASSIC_1K , fixed on NEO3-406 - [FWE-1230] white balance is abnormal
- Turn off CONFIG_BUZZER for avoid interference SAM.
RT1050
- [FWE-1230]Fix camera white abnormal and vertical line - Disable USE_OTP_ETHERNET_MAC for DVT test
### Known issues:
- Doesn't have DVT board ,test based on evt3 board - No DKI. (No NGA protocol) - [NEO3-486] NFC exchange hangup on specific card
VP6825 FW v1.00.050.0000.T
VP6825 Ext v1.00.024.0000.T
K81 - [NEO3-361]SPI Test - [FWE-1638]90-13 supports ICC, SAM, and NFC Tests - support Certificate Loading - support Remote Key Injection
RT1050 - [FWE-1229]Fix PWM LED Doesn't work issue(camera&MSR) - [FWE-1230]Fix camera Doesn't work issue - [FWE-1231]Fix Audio Doesn't work issue - [FWE-1596]90-33 supports UART Test
### Release Notes: K81 - Add UMFG 90-1A,90-1B,90-1C for K81 flash security - Fix 04-09 causes device to crash - Beep when bootup for all Neo 3 projects - K Add PCI Output Check to 02-40 - Disable PM
RT1050 - update camera led on time to 100ms and off time to 900ms - fix spi_slave_driver and turn on PWM/RGB LED in VP6825/VP8810 - modify pin assignment for DVT build
### Known issues: - failed in RKI.(host failed to verify device key) - PWM LED Doesn't work(MSR/Camera) - Camare Doesn't work - Audio speaker Doesn't work
### Release Notes: K81 - based on bootloader 1.02 (support pci security) - turn on pki stm - support 2236 pure date in spi
RT1050 - support 61-01 v5 idg c-frame format in securesock - support 2236 pure date in securesock
### Known issues: - failed in Load certificate. - failed in RKI. - PWM LED Doesn't work - Camare Doesn't work - WIFI Doesn't work
VP6825 FW v1.00.042.0000.T
VP6825 BLE FW v1.00.042.0000.T
## [2022/03/05] VP6825 FW v1.00.042.0000.T
### Release Notes: K81 - support 61-01 IDG Command - Support 81-0B IDG Command - Support 81-0C IDG Command - Statistics added to logging - increase k81_system default stack size to 8192 - support generic tlv process - support default CTLS configuration
### Known issues: - Turn off pci stm(bootup fail) - No cert management. - No RKI. - Didn't support PCI self test. - Not support PCI State machine to common. - No DKI (No NGA protocol). - Can't support CL in protect build. - LCD appear dot line on high temperature test. - audio doesn't work (random occurrence) - Power manager is disabled. - Syslog auto start is disabled.
VP6825 FW v1.00.038.0000.T
VP6825 BLE FW v1.00.038.0000.T
## [2022/02/19] VP6825 FW v1.00.038.0000.T
### Release Notes: K81 - Turn off pci stm - fixed Winbond Flash bootup failed - Print error level syslog in file system and console. - Master reset (90-00, 90-21). - support Mifare card driver.
### Known issues: - No cert management. - No RKI. - Didn't support PCI self test. - Not support PCI State machine to common. - No DKI (No NGA protocol). - Can't support CL in protect build. - LCD appear dot line on high temperature test.
### Release Notes: K81 - Macronix Flash using Fast READ I/O mode Boot fail. - Support for tamper/dryice config from device tree - PWM LED support. - support Mifare driver.
RT1052 - optimize rt1050 spi receive process - merge two partitions into one partition - fixed spi receiving process cannot download fm - fixed the problem of system crash when 1050_start received v5 packets - improve USB read efficiency
### Known issues: - K81 PWM LED doesn't work - 9002 command cannot enable tamper. - Power manager is disabled. - Syslog auto start is disabled.
VP6825 FW v1.00.031.0000.T
VP6825 BLE FW v1.00.031.0000.T
## [2022/01/04] VP6825 BLE FW v1.00.031.0000.T/Ext v1.00.019.0000.T
### Release Notes: K81 - Improve Winbond Flash reading speed. - Enable the external temperature sensor test function. - Bootloader supports Image generated by Protect Build. - Support 4's SAM slot. (For BLE Vrsion Firmware)
RT1052 - LTE & WIFI/BT disable. (For BLE Vrsion Firmware) - BLE enable. (For BLE Vrsion Firmware)
### Known issues: - 9002 command cannot enable tamper. - Power manager is disabled. - Syslog auto start is disabled. - Passthrough charging must connect feamale then connect male. - Can't communicate with phone via male connecter.
### Release Notes: K81 - Core MSR ICC Transaction - Detect Tamper switch in 9013 command. - Modify the K81 socket architecture in Startup Reader System to save memory usage. - K81 sometimes fails to start successfully.(fixed)
RT1052 - RT1052 BLE communication is unstable.(fixed)
### Known issues: - 9002 command cannot enable tamper. - Power manager is disabled. - Syslog auto start is disabled. - Passthrough charging must connect feamale then connect male. - Can't communicate with phone via male connecter.
### Release Notes: K81 - FWE-1260 - [Neo3] K Command 2C-12 read SAM card fail in VP8810 - FWE-1261 - [Neo3] K Command 90-13 to Trigger Audio Speaker cannot work
- FWE-1262 - [Neo3] K Command 90-13 to Test Touch Panel cannot work - 2C01 2C02 Read contactless card failed.(fixed)
RT1052 - Bootloader cannot download firmware ,because bootloader does not support v5 format.(fixed) - There will be problems in the second execution of the RT1050 TP test item.(fixed)
### Known issues: - K81 sometimes fails to start successfully. - RT1052 BLE communication is unstable. - 9002 command cannot enable tamper.
### Enhancements - LTE startup process optimization.
### Release Notes: K81 - FWE-1247 - [Neo3] K Create all IDG commands frame - FWE-1259 - [Neo3] K Commands C7-37 & 2C-20 cannot work in VP8810 - FWE-1263 - [Neo3] K Command 9013 to Test Keypad cannot work RT1052 - FWE-325 - [Neo3] M Inter-Processor Communication (RT1050) - FWE-1264 - [Neo3] K Command 9033 to Test WIFI will fail
### Known issues: - 2C01 2C02 Read contactless card failed. - Use 2C12 command to read SAM card will fail. - Use 9013 command to Trigger Audio Speaker cannot work. - Use 9013 command to Test K81 Touch Panel cannot work. - There will be problems in the second execution of the RT1050 TP test item. - K81 sometimes fails to start successfully. - Bootloader cannot download firmware ,because bootloader does not support v5 format.
### Release Notes: - Support VP6825 - 1.00.023.0000 - 20211111 command. - FWE-1180 - [Neo3] K Add IDG commands 0A02 for VP3350 - FWE-1184 - [Neo3] K Add IDG commands 2904 7781 7782 7783 9007 9014 for VP3350 - FWE-1185 - [Neo3] K Add IDG commands 2C11 2C12 2C13 2C18 6014 C73A for VP3350 - FWE-1187 - [Neo3] K Add IDG commands 9002 for VP3350 - FWE-1202 - [Neo3] K Add IDG commands 7705 9000 9001 9016 9021 for VP3350
### Known issues: - F8-00 Set antenna parameter crashed. - C73F & 2C20 cannot work. - Use 2C12 command to read SAM card will fail. - Use 9013 command to Trigger Audio Speaker cannot work. - Use 9013 command to Test Touch Panel cannot work. - Use 9033 command to Test WIFI will fail.