VP6825 FW v1.00.052.0000.T

VP6825 Ext v1.00.026.0000.T

RT1050
- [NEO3-515]fix ioexpander doesn't work & audio driver initial issue
- [NEO3-510] wifi/bt test

### Known issues:

- No DKI. (No NGA protocol)

- [NEO3-406]NFC polling hangup when using MIFARE_CLASSIC_1K , has been fixed.

- [FWE-1230] camera white balance is abnormal

VP6825 FW v1.00.051.0000.T

VP6825 Ext v1.00.025.0000.T

K81

- Turn off CONFIG_BUZZER for avoid interference SAM.

RT1050

- [FWE-1230]Fix camera white abnormal and vertical line
- Disable USE_OTP_ETHERNET_MAC for DVT test

### Known issues:

- Doesn't have DVT board ,test based on evt3 board
- No DKI. (No NGA protocol)
- [NEO3-486] NFC exchange hangup on specific card

K81
- [NEO3-361]SPI Test
- [FWE-1638]90-13 supports ICC, SAM, and NFC Tests
- support Certificate Loading
- support Remote Key Injection

RT1050
- [FWE-1229]Fix PWM LED Doesn't work issue(camera&MSR)
- [FWE-1230]Fix camera Doesn't work issue
- [FWE-1231]Fix Audio Doesn't work issue
- [FWE-1596]90-33 supports UART Test

VP6825 FW v1.00.048.0000.T

VP6825 Ext v1.00.023.0000.T

## [2022/04/02] VP6825 FW v1.00.048.0000.T/Ext v1.00.023.0000.T

### Release Notes:
K81
- Add UMFG 90-1A,90-1B,90-1C for K81 flash security
- Fix 04-09 causes device to crash
- Beep when bootup for all Neo 3 projects
- K Add PCI Output Check to 02-40
- Disable PM

RT1050
- update camera led on time to 100ms and off time to 900ms
- fix spi_slave_driver and turn on PWM/RGB LED in VP6825/VP8810
- modify pin assignment for DVT build

### Known issues:
- failed in RKI.(host failed to verify device key)
- PWM LED Doesn't work(MSR/Camera)
- Camare Doesn't work
- Audio speaker Doesn't work

## [2022/03/26] VP6825 FW v1.00.046.0000.T

### Release Notes:
K81
- based on bootloader 1.02 (support pci security)
- turn on pki stm
- support 2236 pure date in spi

RT1050
- support 61-01 v5 idg c-frame format in securesock
- support 2236 pure date in securesock

### Known issues:
- failed in Load certificate.
- failed in RKI.
- PWM LED Doesn't work
- Camare Doesn't work
- WIFI Doesn't work

VP6825 FW v1.00.042.0000.T

VP6825 BLE FW v1.00.042.0000.T

VP6825 FW v1.00.038.0000.T

VP6825 BLE FW v1.00.038.0000.T

## [2022/02/19] VP6825 FW v1.00.038.0000.T

### Release Notes:
K81
- Turn off pci stm
- fixed Winbond Flash bootup failed
- Print error level syslog in file system and console.
- Master reset (90-00, 90-21).
- support Mifare card driver.

### Known issues:
- No cert management.
- No RKI.
- Didn't support PCI self test.
- Not support PCI State machine to common.
- No DKI (No NGA protocol).
- Can't support CL in protect build.
- LCD appear dot line on high temperature test. 

VP6825 FW v1.00.031.0000.T

VP6825 BLE FW v1.00.031.0000.T

## [2022/01/04] VP6825 BLE FW v1.00.031.0000.T/Ext v1.00.019.0000.T

### Planning:
- [VP6825 K81- 1.00.030.0000 - 20211230]

- [VP6825 RT1052- 1.00.018.0000 - 2021230]

### Release Notes:
K81
- Improve Winbond Flash reading speed.
- Enable the external temperature sensor test function.
- Bootloader supports Image generated by Protect Build.
- Support 4's SAM slot. (For BLE Vrsion Firmware)

RT1052
- LTE & WIFI/BT disable. (For BLE Vrsion Firmware)
- BLE enable. (For BLE Vrsion Firmware)

### Known issues:
- 9002 command cannot enable tamper.
- Power manager is disabled. 
- Syslog auto start is disabled.
- Passthrough charging must connect feamale then connect male.
- Can't communicate with phone via male connecter.

## [2021/12/30] VP6825 FW v1.00.030.0000.T/Ext v1.00.018.0000.T
### Planning:
- [VP6825 K81- 1.00.030.0000 - 20211230]

- [VP6825 RT1052- 1.00.018.0000 - 2021230]

### Release Notes:
K81
- Core MSR ICC Transaction
- Detect Tamper switch in 9013 command.
- Modify the K81 socket architecture in Startup Reader System to save memory usage.
- K81 sometimes fails to start successfully.(fixed)

RT1052
- RT1052 BLE communication is unstable.(fixed)

### Known issues:
- 9002 command cannot enable tamper.
- Power manager is disabled. 
- Syslog auto start is disabled.
- Passthrough charging must connect feamale then connect male.
- Can't communicate with phone via male connecter.

### Document:

VP6825 TS Command List

TS Command List

### Planning:
- [VP6825 K81- 1.00.028.0000 - 20211220]

- [VP6825 RT1052- 1.00.028.0000 - 2021120]

### Release Notes:
K81
- FWE-1260 - [Neo3] K Command 2C-12 read SAM card fail in VP8810
- FWE-1261 - [Neo3] K Command 90-13 to Trigger Audio Speaker cannot work

- FWE-1262 - [Neo3] K Command 90-13 to Test Touch Panel cannot work
- 2C01 2C02 Read contactless card failed.(fixed)

RT1052
- Bootloader cannot download firmware ,because bootloader does not support v5 format.(fixed)
- There will be problems in the second execution of the RT1050 TP test item.(fixed)

### Known issues:
- K81 sometimes fails to start successfully.
- RT1052 BLE communication is unstable.
- 9002 command cannot enable tamper.

### Enhancements
- LTE startup process optimization.

### Document:

VP6825 TS Command List

TS Command List

### Planning:
-
-

-
-

### Release Notes:
K81
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-1259 - [Neo3] K Commands C7-37 & 2C-20 cannot work in VP8810
- FWE-1263 - [Neo3] K Command  9013 to Test Keypad cannot work
RT1052
- FWE-325  - [Neo3] M Inter-Processor Communication (RT1050)
- FWE-1264 - [Neo3] K Command 9033 to Test WIFI will fail

### Known issues:
- 2C01 2C02 Read contactless card failed.
- Use 2C12 command to read SAM card will fail.
- Use 9013 command to Trigger Audio Speaker cannot work.
- Use 9013 command to Test K81 Touch Panel cannot work.
- There will be problems in the second execution of the RT1050 TP test item.
- K81 sometimes fails to start successfully.
- Bootloader cannot download firmware ,because bootloader does not support v5 format.

### Document:

TS Command List

### Release Notes:
- Support VP6825 - 1.00.023.0000 - 20211111 command.
- FWE-1180 - [Neo3] K Add IDG commands 0A02 for VP3350
- FWE-1184 - [Neo3] K Add IDG commands 2904 7781 7782 7783 9007 9014 for VP3350
- FWE-1185 - [Neo3] K Add IDG commands 2C11 2C12 2C13 2C18 6014 C73A for VP3350
- FWE-1187 - [Neo3] K Add IDG commands 9002 for VP3350
- FWE-1202 - [Neo3] K Add IDG commands 7705 9000 9001 9016 9021 for VP3350

### Known issues:
- F8-00 Set antenna parameter crashed.
- C73F & 2C20 cannot work.
- Use 2C12 command to read SAM card will fail.
- Use 9013 command to Trigger Audio Speaker cannot work.
- Use 9013 command to Test Touch Panel cannot work.
- Use 9033 command to Test WIFI will fail.