### Bug fix: - Disable PM in default DT to fix some variant D HW female detect ping didn't rework. - Don't enable USB voltage regulator to standy in stop mode when usb initialize.
### Planning: - Release candidate for manufacture production.
### Release Notes: - Support bootloader ver 1.02. - Enable PM, button and wdog in default device tree for all VP3350 variant. - FWE-931 [Neo3] K Optimize Neo 3.0 FW Memory Map - FWE-1386 [Neo3] K PCI State Machine - FWE-1330 [Neo3] K Certificate Management Self-Test - FWE-1543 [Neo3] K Compatible PCI (SRED / SRED with PIN / PIN Only)& Non-PCI (Non-SRED) - FWE-1512 [Neo3] K Cardholder CTL2/CLL2 output API - FWE-1538 [Neo3] K Manage EMV TLVs and IDTECH TLVs - FWE-1483 [Neo3] K Driver support USB Suspend Mode - FWE-1459 [Neo3] K Support NGA Protocol - FWE-1506 [Neo3] K Discretionary Data White List API for CT/CTLS/MSR - FWE-1140 [Neo3] K TAL Application Framework - FWE-1551 [Neo3] K Magre Encryption API in CLL2 - FWE-1547 [Neo3] K Preprocess Transaction commands for Compatible SRED & Non-SRED - NEO3-128 [Neo3] Support 81-0E Get Certificate Info /81-0F Get Certificate - FWE-1524,1525 [Neo3] K LED driver - FWE-1009,1010 [Neo3] K TDES AES DUKPT Card Data Cipher - FWE-1495,1498,1499,1500,1501 [NEO3] K Support open,close,read, write and delete via IDG command - Turn on pci/umfg_status checking on 90-00/01/03/04
### Bug fix: - NEO3-212 Fix Delete All key shouldn't erase LCL-KEK. - NEO3-151 Fix [VISA] CRL not effective - NEO3-164 MSR doesn't work in 02-40 or 02-01 - NEO3-232 [VP3350 FW v1.00.042.0000.T]Device doesn't suspend with three times wrong signature - NEO3-220 [VP3350 FW v1.00.042.0000.T][TS196] command 2C20, without swipe card till timeout, reader will reboot - NEO3-161 [VP3350 FW v1.00.038.0000.T] Transaction often mute if doesn't open Console - NEO3-186 [VP3350 FW v1.00.038.0000.T][DPAS] after 02-40 command, response log miss some mandatory data - NEO3-204 [VP3350 FW v1.00.040.0000.T] redundant data in response of some PCD exchange command - NEO3-224 [VP3350 FW v1.00.042.0000.T][Visa transit] Reader can't construct correct SPI command - NEO3-198 [VP3350 FW v1.00.040.0000.T][DPAS] terminate with wrong error code and no two short beeps - FWKV-45 [Kiosk V][KIOSKV FW v1.00.039.0002.T]ACT should be valid after tapping Desfire and Ultralight card
### Known issues: - Didn't support FM upgrade from old version due to flash map and default device tree changed. - The lfs content will miss after FM upgrade due to flash map change. - Must flash srec via JFlash for update the default device tree. - Didn't enable usb suspend function.
### Release Notes: - FWE-1423 Add 91-00 Master reset - FWE-1386 PCI State Machine - FWE-1468 Key Management Self-Test - FWE-1533 Support 81-0B get dukpt key ksn extend. - FWE-1534 Support 81-0C get key info. - FWE-1412 FWE-1413 Add signature verification in 91-01 91-09. - FWE-1410 Support white list signature and verification - NEO3-182 Support default CTLS configuration - FWE-1527 Statistics-gathering & reporting package
### Bug fix: - NEO3-199 RKI doesn't reliable. - NEO3-194 Finetune usb initial flow for VP3350. - NEO3-197 Master reset doesn't work. - NEO3-161 Fix transaction often mute if doesn't open Console. - NEO3-189 NEO3-177 NEO3-120 NEO3-187 Fix transaction issues.
### Known issues: - Not support PCI UI. - 0240 MSR data can't output. - 2C20 Wait swip MSR timeout, reader will reboot. - NEO3-128 Not support 81-0E, 81-0F. TS can't get cerificate list. - BT friend name will miss after reader reboot.
### Release Notes: - Certificate loading. (90-00/01/02/03/04/05 81-0F) - Support PCI state machine to activated. (90-07) - Master reset (90-00, 90-21). - MSR, CT transaction with plain text output.(02-01/02-40) - CL Visa DPAS kernel. - Passthrough standard white list. (91-13/15/17 2C-03/04/07/13/51/53) - Support PM state diagram. - Support pathrough charging. (90-13 26) - FWE-1441 Detect MIFARE DESFire as part of 02-40 leaving. - FWE-1513 K Enable 02-01 No Ciphered ACT - Support Mifare classiccard in passthrough mode. - Print error level syslog in file system and console.
### Known issues: - No cert management. - No RKI. - Didn't support PCI self test. - Not support PCI State machine to common. - No DKI (No NGA protocol). - Can't support CL in protect build.
### Planning: Hot fix for support Mifare DESFire for customer.
### Release Notes: - Support Mifare DESFire and Mifare Ultralight C in passthrough mode. - Only VP3350_FW_v1.00.0037.0000.T_flat.srec can support Visa CL. - FM update flat and protect build.
### Known issues: - Can't load cert key. - PCI State machine is not enabled. - Not support update dtb via FM update tool. - Can't communicate with phone via male connecter - Lightning connector not suport. - Didn't enalbe syslog.
### Release Notes: - FM update bootloader and application. - 9010 Save Serial number in OTP. - FWE-1407 [Neo3] K Mifare Ultralight C Passthough. - FWE-673 [Neo3] K Tamper Management. - FWE-1386 [Neo3] K PCI State Machine. - FWE-1395 [Neo3]K VP3350 Power manager state diagram support.
### Known issues: - Can't load key and certificate. - PCI State machine is not enabled. - Not support update dtb via FM update tool. - Can't communicate with phone via male connecter - Lightning connector not suport. - Not support syslog.
VP3350 FW v1.00.034.0000.T
### Release Notes: - Support protected build. - Bootloader 1.01 version - Enable and config power manager default timer for each config. - FWE-1395 [Neo3]K VP3350 Power manager state diagram support - FWE-1386 [Neo3]K PCI State Machine - FWE-1403 [Neo3]K Add Power Management to TM4 - FWE-1134 Tag 9F02 response error in PDOL. - FWE-713 [Neo3]K Key Management - FWE-1353 [Neo3]K Task Transaction Example - FWE-1009 [Neo3]K TDES DUKPT Card Data Cipher - FWE-1366 [Neo3]K Add BT communication with IDG commands on VP3350 - FWE-875 [Neo3]K Firmware Update via Bootloader. - FWE-673 [Neo3]K Tamper Management - FWE-1394 [Neo3]K When K81 PM enabled, the EMVSIM communication is abnormal
### Known issues: - Syslog auto start is disabled. - Passthrough charging must connect female then connect male. - Can't communicate with phone via male connecter. - Can't update device tree config via FM update tool.
### Release Notes: - Core MSR ICC Transaction - Detect Tamper switch in 9013 command. - Modify the K81 socket architecture in Startup Reader System to save memory usage. - Add coin battery initial driver in device tree config. - Passthrough charging. - BT communication.
### Known issues: - Power manager is disabled. - Syslog auto start is disabled. - Passthrough charging must connect feamale then connect male. - Can't communicate with phone via male connecter.
VP3350 FW v1.00.028.0000.T
### Planning: - -
### Release Notes:
- FWE-1142 - [Neo3] K TAL Contact Integration - FWE-1140 - [Neo3] K TAL Application Framework - FWE-1339 - [Neo3] K Device Tree Commads - FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration - FWE-1349 - [Neo3] K Modify Tamper driver for VP3350 - FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350 - FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350 - FWE-813 - [Neo3] K Contact L1 - FWE-713 - [Neo3] K Key Management
### Known issues: - Use 99-03 command to switch the communicate interface like BT and HID. - Must use 90-25 download the product device tree configuration to enable the driver.
### Release Notes: - FWE-1247 - [Neo3] K Create all IDG commands frame - FWE-896 - [Neo3] K Setup Power Management in IDLE loop - FWE-1227 - [Neo3] K Watchdog System - FWE-1083 - [Neo3] K Default Device Tree Configuration
### Known issues: - 2C-01 2C-02 Read contactless card failed. - C7-3A Get tamper information is wrong.
### Document: -
VP3350 FW v1.00.023.0000.T
### Release Notes: - Release fm file for DVT 2 production. - Release bootloader and default device tree in srec. - FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350 - FWE-1205 - [Neo3] K CFG ID for VP3350
### Known issues: - F8-00 Set antenna parameter crashed.
VP3350 FW v1.00.022.0000.T
### Release Notes: - Support command. - FWE-1180 - [Neo3] K Add IDG commands 0A02 for VP3350 - FWE-1184 - [Neo3] K Add IDG commands 2904 7781 7782 7783 9007 9014 for VP3350 - FWE-1185 - [Neo3] K Add IDG commands 2C11 2C12 2C13 2C18 6014 C73A for VP3350 - FWE-1187 - [Neo3] K Add IDG commands 9002 for VP3350 - FWE-1202 - [Neo3] K Add IDG commands 7705 9000 9001 9016 9021 for VP3350
### Known issues: - C73A Tamper get DRS failed due to didn't enable tamper. - 6014 Contact get reader status incorrect parameter response. - 2C18 ICC power off command get incorrect parameter response. - 7781 should support reset BLE name and password.
VP3350 FW v1.00.001.0000.T
### Release Notes: - Support command. - FWE-1180 - [Neo3] K Add IDG commands 010B 0B02 9013 F002 for VP3350 - FWE-1181 - [Neo3] K Add IDG commands 2801 2C01 2C02 2C03 F800 F801 for VP3350 - FWE-1182 - [Neo3] K Add IDG commands F004 for VP3350 - FWE-1183 - [Neo3] K Add IDG commands 1201 1202 2506 2900 for VP3350