| Neo 3 Firmware release table
Date | Version | Package | Note |
VP3350 FW v1.00.030.0000.T | ### Planning: - [VP3350 - 1.00.030.0000 - 20211224](https://atlassian.idtechproducts.com/confluence/display/N3PM/VP3350+-+1.00.030.0000+-+20211224) ### Release Notes: - Core MSR ICC Transaction - Detect Tamper switch in 9013 command. - Modify the K81 socket architecture in Startup Reader System to save memory usage. - Add coin battery initial driver in device tree config. - Passthrough charging. - BT communication. ### Known issues: - Power manager is disabled. - Syslog auto start is disabled. - Passthrough charging must connect feamale then connect male. - Can't communicate with phone via male connecter. | VP3350 FW v1.00.028.0000.T | ### Planning:
-
- ### Release Notes:
- FWE-1142 - [Neo3] K TAL Contact Integration
- FWE-1140 - [Neo3] K TAL Application Framework
- FWE-1339 - [Neo3] K Device Tree Commads
- FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration
- FWE-1349 - [Neo3] K Modify Tamper driver for VP3350
- FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350
- FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350
- FWE-813 - [Neo3] K Contact L1
- FWE-713 - [Neo3] K Key Management
### Known issues:
- Use 99-03 command to switch the communicate interface like BT and HID.
- Must use 90-25 download the product device tree configuration to enable the driver.
### Document:
- [TS Command List](https://atlassian.idtechproducts.com/confluence/display/NEO3/TS+Command+List)
VP3350 FW v1.00.026.0000.T | ### Planning:
-
- ### Release Notes:
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-896 - [Neo3] K Setup Power Management in IDLE loop
- FWE-1227 - [Neo3] K Watchdog System
- FWE-1083 - [Neo3] K Default Device Tree Configuration
### Known issues:
- 2C-01 2C-02 Read contactless card failed.
- C7-3A Get tamper information is wrong.
### Document:
- VP3350 FW v1.00.023.0000.T | ### Release Notes: - Release fm file for DVT 2 production. - Release bootloader and default device tree in srec. - FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350 - FWE-1205 - [Neo3] K CFG ID for VP3350 ### Known issues: - F8-00 Set antenna parameter crashed. | VP3350 FW v1.00.022.0000.T | ### Release Notes:
- Support command.
- FWE-1180 - [Neo3] K Add IDG commands 0A02 for VP3350
- FWE-1184 - [Neo3] K Add IDG commands 2904 7781 7782 7783 9007 9014 for VP3350
- FWE-1185 - [Neo3] K Add IDG commands 2C11 2C12 2C13 2C18 6014 C73A for VP3350
- FWE-1187 - [Neo3] K Add IDG commands 9002 for VP3350
- FWE-1202 - [Neo3] K Add IDG commands 7705 9000 9001 9016 9021 for VP3350### Known issues:
- C73A Tamper get DRS failed due to didn't enable tamper.
- 6014 Contact get reader status incorrect parameter response.
- 2C18 ICC power off command get incorrect parameter response.
- 7781 should support reset BLE name and password.
VP3350 FW v1.00.001.0000.T | ### Release Notes:
- Support command.
- FWE-1180 - [Neo3] K Add IDG commands 010B 0B02 9013 F002 for VP3350
- FWE-1181 - [Neo3] K Add IDG commands 2801 2C01 2C02 2C03 F800 F801 for VP3350
- FWE-1182 - [Neo3] K Add IDG commands F004 for VP3350
- FWE-1183 - [Neo3] K Add IDG commands 1201 1202 2506 2900 for VP3350