### Release Notes: - Core MSR ICC Transaction - Detect Tamper switch in 9013 command. - Modify the K81 socket architecture in Startup Reader System to save memory usage. - Add coin battery initial driver in device tree config. - Passthrough charging. - BT communication.
### Known issues: - Power manager is disabled. - Syslog auto start is disabled. - Passthrough charging must connect feamale then connect male. - Can't communicate with phone via male connecter.
VP3350 FW v1.00.028.0000.T
### Planning: - -
### Release Notes:
- FWE-1142 - [Neo3] K TAL Contact Integration - FWE-1140 - [Neo3] K TAL Application Framework - FWE-1339 - [Neo3] K Device Tree Commads - FWE-1342 - [Neo3] K VP3350 A,B,C,D Product Device Tree Configuration - FWE-1349 - [Neo3] K Modify Tamper driver for VP3350 - FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350 - FWE-1366 - [Neo3] K Add BT communication with IDG commands on VP3350 - FWE-813 - [Neo3] K Contact L1 - FWE-713 - [Neo3] K Key Management
### Known issues: - Use 99-03 command to switch the communicate interface like BT and HID. - Must use 90-25 download the product device tree configuration to enable the driver.
### Release Notes: - FWE-1247 - [Neo3] K Create all IDG commands frame - FWE-896 - [Neo3] K Setup Power Management in IDLE loop - FWE-1227 - [Neo3] K Watchdog System - FWE-1083 - [Neo3] K Default Device Tree Configuration
### Known issues: - 2C-01 2C-02 Read contactless card failed. - C7-3A Get tamper information is wrong.
### Document: -
VP3350 FW v1.00.023.0000.T
### Release Notes: - Release fm file for DVT 2 production. - Release bootloader and default device tree in srec. - FWE-1186 - [Neo3] K Add IDG commands 2C20 C73F for VP3350 - FWE-1205 - [Neo3] K CFG ID for VP3350
### Known issues: - F8-00 Set antenna parameter crashed.
VP3350 FW v1.00.022.0000.T
### Release Notes: - Support command. - FWE-1180 - [Neo3] K Add IDG commands 0A02 for VP3350 - FWE-1184 - [Neo3] K Add IDG commands 2904 7781 7782 7783 9007 9014 for VP3350 - FWE-1185 - [Neo3] K Add IDG commands 2C11 2C12 2C13 2C18 6014 C73A for VP3350 - FWE-1187 - [Neo3] K Add IDG commands 9002 for VP3350 - FWE-1202 - [Neo3] K Add IDG commands 7705 9000 9001 9016 9021 for VP3350
### Known issues: - C73A Tamper get DRS failed due to didn't enable tamper. - 6014 Contact get reader status incorrect parameter response. - 2C18 ICC power off command get incorrect parameter response. - 7781 should support reset BLE name and password.
VP3350 FW v1.00.001.0000.T
### Release Notes: - Support command. - FWE-1180 - [Neo3] K Add IDG commands 010B 0B02 9013 F002 for VP3350 - FWE-1181 - [Neo3] K Add IDG commands 2801 2C01 2C02 2C03 F800 F801 for VP3350 - FWE-1182 - [Neo3] K Add IDG commands F004 for VP3350 - FWE-1183 - [Neo3] K Add IDG commands 1201 1202 2506 2900 for VP3350
Ui tab
title
Neo 2
Neo 2 Firmware release table
Date
Version
Package
Note
VP3350 FW v1.00.014.0464.T RELEASE
Disable tamper and self test for power management test. Fix DVT2 current too high when enter sleep mode. (DVT2 C) Support Winbond External Flash.
VP3350 FW v1.00.013.0464.T RELEASE
Disable tamper and self test for power management test . Use male connector charge phone 500mA when detect female cc pin is 500mA
VP3350 FW v1.00.012.0464.T RELEASE
Use release build tool to release the version. Fix sometimes can't get TM4 version.
VP3350 FW v1.00.011.0464.T DEBUG
Disable USB switch for config B. (DVT B) Fix can't enter standby mode for BT version.
VP3350 FW v1.00.010.0450.T DEBUG
Disable USB suspend function for config D. (DVT D)