Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Ui tabs


Ui tab
titleNeo 3

Neo 3 Firmware release table

DateVersionPackageNote

VP6825 FW v1.00.023.0000.T

### Release Notes:
- Support VP6825 - 1.00.023.0000 - 20211111 command.
- FWE-1180 - [Neo3] K Add IDG commands 0A02 for VP3350
- FWE-1184 - [Neo3] K Add IDG commands 2904 7781 7782 7783 9007 9014 for VP3350
- FWE-1185 - [Neo3] K Add IDG commands 2C11 2C12 2C13 2C18 6014 C73A for VP3350
- FWE-1187 - [Neo3] K Add IDG commands 9002 for VP3350
- FWE-1202 - [Neo3] K Add IDG commands 7705 9000 9001 9016 9021 for VP3350

### Known issues:
- F8-00 Set antenna parameter crashed.
- C73F & 2C20 cannot work.
- Use 2C12 command to read SAM card will fail.
- Use 9013 command to Trigger Audio Speaker cannot work.
- Use 9013 command to Test Touch Panel cannot work.
- Use 9033 command to Test WIFI will fail.

VP6825 FW v1.00.026.0000.T

### Planning:
-
-

-
-

### Release Notes:
K81
- FWE-1247 - [Neo3] K Create all IDG commands frame
- FWE-1259 - [Neo3] K Commands C7-37 & 2C-20 cannot work in VP8810
- FWE-1263 - [Neo3] K Command  9013 to Test Keypad cannot work
RT1052
- FWE-325  - [Neo3] M Inter-Processor Communication (RT1050)
- FWE-1264 - [Neo3] K Command 9033 to Test WIFI will fail

### Known issues:
- 2C01 2C02 Read contactless card failed.
- Use 2C12 command to read SAM card will fail.
- Use 9013 command to Trigger Audio Speaker cannot work.
- Use 9013 command to Test K81 Touch Panel cannot work.
- There will be problems in the second execution of the RT1050 TP test item.
- K81 sometimes fails to start successfully.
- Bootloader cannot download firmware ,because bootloader does not support v5 format.

### Document:

TS Command List

VP6825 FW v1.00.028.0000.T

### Planning:
- [VP6825 K81- 1.00.028.0000 - 20211220]

- [VP6825 RT1052- 1.00.028.0000 - 2021120]


### Release Notes:
K81
- FWE-1260 - [Neo3] K Command 2C-12 read SAM card fail in VP8810
- FWE-1261 - [Neo3] K Command 90-13 to Trigger Audio Speaker cannot work
- 2C01 2C02 Read contactless card failed.(fixed)

RT1052
- Bootloader cannot download firmware ,because bootloader does not support v5 format.(fixed)
- There will be problems in the second execution of the RT1050 TP test item.(fixed)

### Known issues:
- K81 sometimes fails to start successfully.
- RT1052 BLE communication is unstable.
- 9002 command cannot enable tamper.

### Enhancements
- LTE startup process optimization.


### Document:

VP6825 TS Command List

TS Command List




...