Page Comparison

0.Tested FW:
USAT = VP6300 USAT FW v1.01.099.0465 Test DEBUG
Native,SRED = VP6300 FW v1.01.007.0465.T
1.Run Mode
1.A + PKI901-CFG mode.
Please read [NEO 2.x MFG Test Flow] section.
Effected Part Number(P/N) Scope: ALL P/Ns.

1.B Test Process Flow Updated
Old: TS172 Production Run Mode --> PKI Process (USDK-PKI Demo/Key Injection Tool/PKI002~003)
--> PKI901 Config Tool --> *TS172 QC/QC-US Run Mode.
New: TS172 Production Run Mode --> PKI Process (as Old one)
--> TS PKI901-CFG Run Mode --> *TS172 QC/QC-US Run Mode.

1.C Must-Have Approval Required P/N List:
- IDVV-581821PD
- IDVV-580909CP-US
- IDVV-580801-TL

***[Developer's Note]***

1.json | ADF Log Files Import feature is Available NOW.
Effected P/N Scope: No .Json files Available.
May be used in the near future.

1.A Checking Log File Entry Point Keywords
json = ViVOconfig > Started loading profile to device... <== Entry Point
ADF =
12:19:24.484 ADF APP Sent block 296 of 296 <== Entry Point
1.B NG Check Rules
json =
"fail" --> <> "Remove all Configuration Groups failed"
ADF =
"err" --> !"no err" --> NG

1.C ADF Apps Installation & QC Check Installed Apps Method.
C.1 Please ref TS173 ReleaseNote.txt's V1.03.001-C04 Release Comment.
C.2 https://atlassian.idtechproducts.com/confluence/display/TWRD/011+-+TS173%2C+VP5300%2C+Spectrum+Pro+II#id-011TS173,VP5300,SpectrumProII--C04.zip

V 1.02.007

TE-823

-C01.zip

09 Jul 2021

1.New P/N:
IDVV-580801PD-KT : (#), B.1, -SAM, LCL-KEK, DEK, Encryption Mode Set/Check, +TransA-RI
IDVV-581821PD-KT : (#), B.2, LCL-KEK, DEK, +TransA-RI
2.New TransArmor Injection QC mode check
IDVV-580801 : (#), +TransA-RI
IDVV-580801-C1 : (#), +TransA-RI
IDVV-580821 : (#), +TransA-RI

IDVV-580801P : (#), +TransA-RI
IDVV-580801CP : (#), +TransA-RI

IDVV-580801PD : (#), +TransA-RI

Note:
(#) = PKI901 Required before QC mode check

V 1.02.006

-C03.zip

04 Nov 2020

1.[RFID Test] Update Card Removal Delay to extend the DUT slow response.

old: 1 sec

new: 2 sec

-C02.zip

03 Nov 2020

1.RFID Test Frozen issue fixed

Sol: Removed invalid command F0-F9 Legacy Cmd (LCD Clear)

-C01.zip

22 Oct 2020

Visa-TQM Audit MFG test issue : No Type A CL Card Test.

Resolve: RFID Test Updated , Type A+Type B : 0cm+4cm Tests

old: Type A : 0cm+4cm , 2 sub-steps.

new: Type A+B : 0cm+4cm , 4 sub-steps.

Requested SQA JIRA:

Jira Legacy

server	ID TECH - JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-432

V 1.02.005

-C03.zip

09 Jun 2020

1.Disable - Summary Log Shows Up Automatically

old: Auto Pops up Summary Log after ALL Test Items Passed.

new: Manually open Summary Log File by Mouse Right-Clicking Test Window's Top Tab (Prodction Mode/QC Mode/QC-US mode)

Mindy Yang 22 Jun 2020
RE VP6300TS172 V1.02.005-C03 Released.msg

-C02.7z

03 Jun 2020

1.Fixed Summary Log Can't Display Issue.

Note: Backward Read Line.File < File.Size

Mindy Yang 03 Jun 2020
RE TS172 V1.02.005-C01 + PKI901 V 1.01.007-C06 Released.msg

-C01.7z

03 Jun 2020

Ex: Summary-202062-IDVV-580801PD_QC-US.log

1.P/N List Updated

[+] IDVV-580801P, TDES, MSD/MSR On, EMV On

2.Summary Log (.\Logs\Summary\XXX.log) being Supported.

V 1.02.004

-C02.7z

11 May 2020

1.P/N List

[M] IDVV-580801-TL, Script File Check

mode scope : [QC]+ [QC-US]

Adding DFEE38(08) + 5F2A(0949) Checks in System Groups...

group scope: 00, 80, 90, A0, B0, C0, D0,

Mindy Yang 12 May 2020
RE VP6300TS172 V1.02.004-C02 + PKI901 V1.01.007-C03 Released - Updated V04.msg

-C01.7z

02 May 2020

RE VP6300 New PN application .msg

1.+P/N List

1.1 [+] IDVV-580801-TL,

QC mode : Global TLVs Checks, Turkish Languages+Currency.

A. Set Turkish Language: Change tag DFEE38 to “08”

B. Set Turkish Currency: Change tag 5F2A for all groups and AIDs to “0949”.

1.2 [+] IDVV-580801-C1 : Non-SRED, -SAM, -TAMPR, LCL-KEK

V 1.02.003

-C01.exe

02 May 2020

1.[UMFG] Set S/N 90-10 Improvement

old: 90-10 + S/N 10 bytes + padding 0x00 5 bytes

--> Response V2 Code : 0x22, Failed and Retyring

--> 90-10 + S/N 10 bytes

--> Response V2 Code : 0x00, done

new: 90-10 + S/N 10 bytes

--> Response V2 Code : 0x00, done

2. Move RS232/Keypad (System Rebooting) Items test order backward

old: LCD --> RS232/Keypad (System Rebooting) --> Time check --> S/N, UMFG

new: ICC --> RS232/Keypad (System Rebooting) --> LEDs + Buzzer --> LCD ...

3. Advanced / Detail V2 Status Code Information, S/N relatives

Set S/N : 90-10 (UMFG), Response V2 Status

0x22 -

Get S/N : 12-01 Response V2 Status

0x0A

0x21

V 1.02.002

-C01.7z

14 Jan 2020

Approved firmware:

VP6300 USAT FW v1.01.068.0330 Test

VP6300 USAT FW v1.01.079.0387 Test

1.Serial Number Input Checking Improvement.
@ 952T123456 --> okay.
@ 9T2323 --> Error Code: -1,
cause: The S/N length must be 10 chars.

@ 9520123456 --> Error Code: -2,
the 4th char must be Upper case Alphabet. Here is a invalid digit type char "0"

@ 952t123456 --> Error Code: -2, 't' is lower case alphabet, not upper case one.

@ 952TT23456 --> Error Code: -3, Only the 4th char is Upper case alphabet. Other chars are numeric.

@ 954T123456 --> Error Code: -4, "54" > "53", it's invalid.

@ 900T123456 --> Error Code: -5, "00" < "01", it's invalid.

2.[Fixed] Chinese & English Message , No Translation, [Cancel by User],
3.[Fixed Issue][Engineer Note]
Remove 04-09 command, in QC mode.
Remove this modification in the future :
"shorten solution: + issuing 04-09 in [RS232+Keypad].QC mode's end to restore 2C-20 Response in normal.", V1.01.010-C02 added

--------------------------

4.[Fixed Issue][Engineer Note][Warning]

<Root-cause : poll mode changed in certain firmware version

old : auto poll

new: poll on demand.

<Test scenario:

old :

[QC mode] Set Poll on demand --> Native Test Commands --> Set Auto Poll mode --> done.
new :
[QC mode] Native Test Commands --> done.

<Update Auto Poll behaviors in the following test items....
4.a [QC mode]ICC Test
4.b [QC mode]Keypad Test
4.c [QC mode]LEDs Test
4.d [QC mode]LCD Test

RE VP6300TS172USAT V1.02.002-C01 Renew..msg

SHA-512: ACFE18301CE6E4F1138848878EFCB0527FC4DBA62AE1BFAA170E90D4AF369DF9E1D98EE700E9A70EF547B752D343995FCBB735488C72FD505122FEBD53E94B33

V 1.02.001

-C02.7z

10 Sep 2019

1.Fixed No DUKPT Key (DEK) Check @ QC-US mode in the following P/N list.

IDVV-580809CP-US

RE TS172 VP6300 V1.02.001-C02 Released.msg

SHA-512: 94395767A8A6D87F711BDDEB32DBD46CBC5115E4D4AA3373130E3B67433E33D1F4AAB8D3661DBDE08EF956CB84B2D92B22446D7A721D1BD00E0A7904F0BDED26

-C01.7z

09 Sep 2019

Verified FW Info:

VP6300 FW v1.00.068.0384.T

USB Boot Loader Version : 31 2E 31 33, 1.13

1.Added QC-US mode. For Data Key Injected DUT check status.
2.Removed Send Data Portion in the following UMFG commands.

90-00,90-02,90-04,90-05,91-08,92-00,92-04.

3.Added DUKPT Key (DEK) Check @ QC-US mode in the following P/N list.

IDVV-581821P

IDVV-580809CP-US

IDVV-581801P

~~IDVV-581801CP~~ → IDVV-580801CP

Note: Difference (QC,QC-US): Data Key(DEK) is checked (DEK) at QC-US mode but NOT at QC mode.

V 1.01.012

-C01.7z

15 Aug 2019

1.Temp for IDVV-581821P, Roy.PE.MFG Request.

Issue: No Tamper Test Function.

-----[Note 01 for software programmer, Keywords Definition]-----

SREKeyword = ".S Prod" / ".S Test" / ".T," / ".S,"

ID TECH standard products with keys include ITP, TLP and NGA products.

- SRED / Production - [Major].[Minor].[Build].[Platform].S

- SRED / Test - [Major].[Minor].[Build].[Platform].T

- NSRED / Production - [Major].[Minor].[Build].[Platform]

- NSRED / Test - [Major].[Minor].[Build].[Platform].D

USAT VP6300

- SRED / Production - [Major].[Minor].[Build].[Platform].S Prod

- SRED / Test - [Major].[Minor].[Build].[Platform].S Test

- NSRED / Production - [Major].[Minor].[Build].[Platform] Prod

- NSRED / Test - [Major].[Minor].[Build].[Platform] Test

RE TS172VP6300 V1.01.012-C01 Released.msg

SHA-512: 55F955F36A7AEF355A3408BE45E33EE90CF0FC97DDC98DB9C104BEF6AFF8BE6BFA1F028D0D4711B35741626991561287E52C9DBA4515F7BBBA595D581E5E0E9F

V 1.01.011

-C03.7z

23 Jul 2019

RE VP6300TS172 V1.01.011-C03 Released.msg

1.Updated RS232+Keypad Test Item @ QC mode.

Retrying Times

old: 3

new: 1

2. P/N Updated

old: IDVV-580909CP

new: IDVV-580801CP

SHA-512:

DF3D07BD54B77A6D4A94E3194E28DE54A156BCEE0CF771FE9B5E55FBFD66E93B1961484AB46E8D89E63C0C23D942A05DEC8501F4C372097FBCC770000C57D528

Kate Hung Approved

-C02.7z

23 Jul 2019

1.Updated RS232+Keypad Test Item @ QC mode.

If P/N = "IDVV-580...P???", this is Non-SRED + Encryption Required model.

It's must be set encryption mode after PKI process.

old behaviors:

04-09

new:

04-09 --> C7-36 Set --> C7-37 get & check

-C01.7z

22 Jul 2019

1.Updated P/N List

[+] IDVV-580801CP, -SAM, LCL-KEK, DEK, +TransA-RI

+ QC mode's "Settings Check" item.

For Encryption Mode ON Check : "C7-37", response = 0x03 (EMV+MSR/MSD ON)

[M] IDVV-580801PD, IDVV-580909CP-US.

old: No Encryption mode Set/Check

new: C7-37 Check.

+ QC mode's "Settings Check" item.

For Encryption Mode ON Check : "C7-37", response = 0x03 (EMV+MSR/MSD ON)

Note: Needs PKI901 to enable Non-SRED DUT's Encryption Mode.

V 1.01.010

IDVV-580801 : Non-SRED,-SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED, -SAM, LCL-KEK, DEK,
IDVV-580821 : Non-SRED, -TAMPR, LCL-KEK,

IDVV-580909CP-US :Non-SRED, -SAM, LCL-KEK, *9600

Intf: 1st - USB-HID, 0ACD:4443; 2nd - RS232,9600 bps,8,N,1;

IDVV-581801P : SRED, -SAM, LCL-KEK, +TransA-RI
IDVV-581821P : SRED, LCL-KEK, +TransA-RI
IDVV-581821PD : SRED, LCL-KEK, DEK, +TransA-RI

-C02.7z

18 Jul 2019

RE VP6300 USAT TS172 V1.01.010-C02 Released.msg

1.Updated P/N List

1.1 old P/N: depending on Part Number ISO document.

IDVV-581909CP-US :B.3, -SAM, LCL-KEK, *9600

since 581XXX... --> where "1" = SRED,

new P/N:

IDVV-580909CP-US :B.3, -SAM, LCL-KEK, *9600

since 580XXX... --> where "0" = Non-SRED

2.Fixed MSR Item Issues.

2.a 2C-20 response frame only stays in 4 bytes (B1 + B2 + CRC1 + CRC1 ) due to [RS232+Keypad] QC Mode test.

shorten solution: + issuing 04-09 in [RS232+Keypad].QC mode's end to restore 2C-20 Response in normal.

2.b 2C-20 Response Never Cleanup Issue.

Issue: Test Passed (2C-20 passed) --> No Disconnection

--> DUT has other tests or L2 behaviors --> If 2C-20 response invalid or failed

--> check point (A) --> 2C-20 passed since previous resp info (Tk data + Tk status) is reserved.

Fixed: To clean up all 2C-20 response data info at the beginning of MSR Test.

Kate Hung 18 Jul 2019

-C01.7z

17 Jul 2019

---< Verified FW Version >---

1.USAT-S

VP6300 USAT-S FW v1.01.059.0318.S Test

USB Boot Loader Version : 31 2E 31 37, 1.17

2.USAT

VP6300 USAT FW v1.01.068.0330 Test

USB Boot Loader Version : 31 2E 31 37, 1.17

---<Updated Items>---

1.Updated RS232 + Keypad Test function.

1.1 wakeup delay time

old: 4000 ms

new: 6000 ms

V 1.01.009

-C02.7z

27 Jun 2019

FW Version: VP6300 FW v1.00.058.0364.DTest , WorldNet
1.Fixed LEDs+Buzzer Issues.

Now all VP6300 serials using same LEDs' test patterns.

-C01.7z

21 Jun 2019

1.Updated MSR Test.
1.a Added 2C-20 Track 1~3 Status Info in the MSR Test Result. (Done, 2019 June 20, goofy.liu)

------[Reader]------

MSR Card type = Other

(Bit 0) Tk1 Decode : Okay

(Bit 1) Tk2 Decode : Okay

(Bit 2) Tk3 Decode : Okay

(Bit 3) Tk1 Data : Found

(Bit 4) Tk2 Data : Found

(Bit 5) Tk3 Data : Found

Field 10 -optional bytes length : N/A

1.b Removed 28-01 Antenna ON before MSR Test On.

This is temporarily removed since production MSR Test Failed up 90% and needs HW/ME/SW performing

advanced analysis.

V 1.01.008

-C01.7z

18 Jun 2019

VP6300 Verified FW Version String List.txt

1.Automatically Add/Remove Tamper Test depending on FW Info String of SRED(.S) or Non-SRED(.D or N/A).

+ Tamper Test has been added back to the P/N:IDVV-581909CP-US.

Mindy Yang 19 Jun 2019

RE VP6300TS172 V1.01.008-C01 Released - Updated Info V02.msg

V 1.01.007

-C03.7z

05 Jun 2019

1.RS232+Keypad test updated.

old: 1 second wait after rebooting & RS232 connecting

new: 4 seconds wait after rebooting & RS232 connecting

-C02.7z

05 Jun 2019

1.FW Version Updated

Adding C7-3A Get DRS Check.

Check Item List:

(A) TM4 Checksum Value Verification.

(B) K81 Self Check Verification.

Production Mode: (A)

QC Mode: (A)+(B)

-C01.7z

04 Jun 2019

--<FW Version List>--

VP6300 SRED : Build 0192

VP6300 Mon-SRED : Build 0192

VP6300-USAT SRED: Build 0318

1.Tamper Test & Check Process Update

old: C7-3A missed check (1) K81 Self-Check Error (2) TM4 Check Value (3) No Source Data Display (ex:00,01,FE, etc.)

new:

(a)All new checks for (1)+(2)+(3)

(b)Ignored Item List. VP6300 SRED products.

b.1 TM4 Removal Sensor.

2.Tamper Test & Check.

Being Removed in the P/N:IDVV-581909CP-US

3.FW Info, Boot loader Version Display Updated.

Old: "Boot Loader Version: ASCII Info"

New: "Boot Loader Version: Hex, ASCII Info"

Since Arena FW Build:0192 must be used in Binary Format, Not ASCII Type.

4.[TQM] ICC Test.

New Test Scenario:

If APDU Exchange 2C-13 Execution Failed (since UMFG mode DUT doesn't support before FW Build:318),

the DUT is VP6300-USAT type, then TS ignores the error.

This is for shorten solution VP6300 production request by Freddy.

Suggested Valid Date: 2019 July End.

V 1.01.006

-C01.7z

03 May 2019

1.TQM Request Supported

1.A RFID Test : 0cm+4cm

1.B ICC Test :

old: Insert Contact Type 02 Card --> GetATR --> Remove Type 02 Card --> Done

new: Insert Contact Type 02 Card --> GetATR --> APDU Information Exchanges --> Remove Type 02 Card --> Done

2.[Roy's Request]

LCD 700 ms+ sliding Wait Duration in the other pixels full image.

This is LCD Spec Limitation !!

Ans: Add 700ms delay between LCD Display Pixels Full ON-OFF

3.[Roy's Request]

RS232 + Keypad Test. Sometimes RS232 (PING Command) Failed.

old :

USB -->

DCP (500 ms) -->

Toggling to RS232 by Retrying 3 times PING Commands -->

Okay & Device Ready --> KeyPad Test --> Back to USB and Ping --> Done

ToDo:

USB -->

Delaying Certain Period (DCP, 2k ms) -->

Toggling to RS232 by Retrying 10 times PING Commands -->

Okay & Device Ready --> KeyPad Test --> Back to USB and Ping --> Done

Ans: New Method Done

4.File Info Version Consistency Check with ReleaseNote.txt
5.UI Items Text Minor Changes.

(a)1st dialog box settings (Startup Dialogbox UI)

RS232 Items Display.

Language Items Display.

6.Test Item Updated

[FWInfo]

old:

1.17

new:

USB Boot Loader Version : 1.17

7.[QC Mode][FWInfo]

Excluded(OFF) Global TLVs @ QC mode.

This is limitation of firmware design.

Reported by Chingwei. Now the FW sets up the L2 Pool after certain EMV L2 Keys installation.

8.MSR Test Scenario Updated.

old scenario:

2C-20 --> MSR Swipe --> Done

new :

28-01, Antenna ON --> 2C-20 --> MSR Swipe --> 28-01, Antenna OFF --> Done

This is for the MSR Failed Issue in case of slowly swiping and turn ON the Antenna.

Mindy Yang 03 May 2019
RE TS172VP6300USAT-S V1.01.006-C01 Released.msg

V 1.01.005

IDVV-580801 : Non-SRED,-SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED,-SAM, -TAMPR, LCL-KEK, DEK
IDVV-580821 : Non-SRED, -TAMPR, LCL-KEK,
IDVV-581801P : -SAM, LCL-KEK, +TransA-RI
IDVV-581821P : LCL-KEK, +TransA-RI
IDVV-581821PD : LCL-KEK, DEK, +TransA-RI
IDVV-581909CP-US : -SAM, LCL-KEK,

Intf: 1st - USB-HID, 0ACD:4443; 2nd - RS232,9600 bps,8,N,1;

-C03.zip

06 Mar 2019

RE TS172VP6300USAT-S V1.01.005-C03 Released.- V02.msg

USAT FW: 0299.S

1.PN List Updated.

1.A - Rename USAT's Part Numbers

[-] IDVV-580801-US, removed.

[-] IDVV-581801P-US, removed.

[+] IDVV-581909CP-US, added. . No TransArmor CA RI.

SHA-512:AD5D3E48791D08DD5DED383AD99ED20454FE7147E2D5B52594ED5A4D0A2305B0D773D6EF2B7507219EFEF8E82205F49B3488109063EB7941B9697E0F9C4476B7

-C02.zip

15 Feb 2019

15 Feb 2019 goofy.liu

1.Updated RS232 Interface Test, for VP6300 USAT-S

To Waiting DUT onto sleep mode then Ping/RS232 to DUT again.

IDVV-580801PD

2.P/N List Updated for Cmd F0-F7.

Please read VP6300 USAT-S Supplyment.

IDVV-580801-US -- LEDs Bottom x 4
IDVV-581801P-US -- LEDs Bottom x 4

-C01.zip

24 Jan 2019

24 Jan 2019 goofy.liu

1.PN List Updated.

(+) IDVV-581801P-US: -SAM, LCL-KEK, +TransA-RI, Intf: 1st - USB-HID, 0ACD:4443; 2nd - RS232,9600 bps,8,N,1;

2.+ 09-01 parser now supports Product Type of USAT-S.
3.Ignores Reboot behavior in the RS232+Keypad Test.

Verified in FW VP6300 USAT-S FW v1.00.000.0280.S Test.

V 1.01.004

IDVV-580801 : Non-SRED,-SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED,-SAM, -TAMPR, LCL-KEK, DEK
IDVV-580801-US : Non-SRED,-SAM, -TAMPR, LCL-KEK, Intf:1st - USB-HID, 0ACD:4442, 1+63 bytes(report id); 2nd - RS232,9600 bps,8,N,1
IDVV-580821 : Non-SRED, -TAMPR, LCL-KEK,
IDVV-581801P : -SAM, LCL-KEK, +TransA-RI
IDVV-581821P : LCL-KEK, +TransA-RI
IDVV-581821PD : LCL-KEK, DEK, +TransA-RI

-C03.zip

10 Jan 2019

10 Jan 2019 goofy.liu

1.Remove F0-F9 LCD Clear Command to prevent from LCD Test Failed (No Pixels ALL ON).

This comes by Fixed JIRA Issue behavior.

Later the FW Team will add an unlock command (provide by Robin).

2.Fixed QC Mode Settings Check Issue.

Contact Terminal Data Checking..

Old: DFEE1E --> Terminal Configuration.................. = 50 9C 20 F0 C2 0E 16 00

New, Correct: DFEE1E --> Terminal Configuration.................. = D0 9C 20 F0 C2 0E 16 00

Approved FW: 0270.Test USAT Version.

Mindy Yang10 Jan 2019
RE VP6300USAT TS172 V1.01.004-C03 Released.msg

SHA-512: A2F766B866B456E38EDA5D57B870536A09BBD03FA80F47A781BC0BA1076DABB17F57DF64FC9E08CADA22296E93D8325263702DE561A8EBFA0B89283BD765254E

-C02.zip

08 Jan 2019

08 Jan 2019 goofy.liu

1.Fixed IDVV-581XXXP QC Mode, + Check TransArmor Root + Interm Certs
2.Improved Internal Data Files Reference Path methods.

(PartNumber, ReleaseNote.txt, InstallNote.txt, Local.txt, Logs)

3.Improved FWInfo-Product Type(09-01) Supported

3.A Shorten Solution if VP6300 has no 09-01 (0x0A) supported

--> Passed if Product Type N/A.

3.B (+) New Product Types

VP5300M = 56 33 01

VP6300 USAT = 56 34 01

-C01.zip

07 Jan 2019

07 Jan 2019 goofy.liu

1.Added Supported PID(s)

(+) PID = 4442, USAT ONLY,

2.P/N List

(M) IDVV-581801P : +TransA-RI

V 1.01.003

IDVV-580801 : -SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED,-SAM, -TAMPR, LCL-KEK, DEK
IDVV-580801-US : Non-SRED,-SAM, -TAMPR, LCL-KEK, 1st :USBHID,2nd: RS232 +Baudrate = 9600 bps, Y-Cable ONLY
IDVV-580821 : -TAMPR, LCL-KEK,
IDVV-581801P : -SAM, LCL-KEK
IDVV-581821P : LCL-KEK, +TransA-RI
IDVV-581801P : LCL-KEK, DEK, +TransA-RI

-C05.zip

28 Dec 2018

28 Dec 2018 goofy.liu

1.Start UP Dialog Box (Form) Message Display Updated.

Old : All IDVV-5XXXXX ==> [Warning] "Please make sure to Unplug USB Cable !"

New : IDVV-580801-US (USAT) ==> [Warning] "Please make sure to Plug-In USB Cable !".

Y-Cable ONLY !!

Others IDVV-5XXXXX ==> [Warning] "Please make sure to Unplug USB Cable !".

Mindy Yang28 Dec 2018
RE VP6300TS172 V1.01.003-C05 Released.msg

-C04.zip

24 Dec 2018

24 Dec 2018 goofy.liu

1.P/N List Update

IDVV-580801-US, Please Explore ReleaseNote.txt

-C03.zip

21 Dec 2018

21 Dec 2018 goofy.liu

1.Updated Tampered Test.
2.Updated IDVV-580801-US QC mode Settings Check item.

901 - PKI901 Configuration Loader After PKI process

-C02.zip

19 Dec 2018

19 Dec 2018 goofy.liu

1.P/N List Updated

1.a IDVV-580801PD : Non-SRED, LCL-KEK, DUKPT Key(DEK)

1.b +IDVV-580801-US: Non-SRED, LCL-KEK, RS232 baudrate = 9600 bps

1.b.1 + Contact L2 Configuration Get Check in QC mode.

Note: PKI901, IDVV-580801-US performs Contact L2 Configuration Set & Check
IDVV-580801-US_CFG.zip - Used by TS, (i.e. Convert CT L2 config files into Tx/Rx Script files)
IDVV-580801-US_CFG_CT_L2.zip - Used by CT L2 Tool

-C01.zip

13 Dec 2018

13 Dec 2018 goofy.liu

1.+P/N

IDVV-580801PD : Non-SRED, LCL-KEK, DUKPT Key(DEK)

--<Note>--

Add P/N List if there is/are updated P/N Info.

V 1.01.002

-C01.zip

19 Nov 2018

19 Nov 2018 goofy.liu

1.Add TransArmor Certs Check @ VP6300 following P/Ns QC Mode.

IDVV-581821P

IDVV-581821PD

TransArmor Cert Download Tool Link

2.Installed package.

old = Setup file.

new = Zip file.

Mindy Yang20 Nov 2018
E-mail.msg

V 1.01.001

-C01

26 Sep 2018

26 Sep 2018 goofy.liu

1.Removed Removal Sensor Test in All Part Numbers since PCI lab perfers to ignore them.
2.Always Performing 90-07+90-00 after tamper test on both Production & QC modes.

Also fixed certain incorrect tampered inforamtion display.

Mindy Yang26 Sep 2018

V 1.00.007

-C01

22 Aug 2018

22 Aug 2018 goofy.liu

1.Add USB Unplugging information before start connection.

This informs operator to unplug usb cable before test start and

preventing UUT from falling into suspend/sleep mode to interfere

the TS running.

Mindy Yang 06 Sep 2018

V 1.00.006

-C01

13 Jul 2018

VP8800 2C-20 MSR Test for SRED mode (SMFG) is required.msg

1. + Test Items in QC mode.

LCD;

LEDs+Buzzer;

Removal Sensor.

2.Update QC mode Keys Info Verification Procedure.

FW Build SRED : 0161.S ;

Non-SRED : 0161;

V 1.00.005

-C04

28 Jun 2018

28 Jun 2018 goofy.liu

1.Remove LCD, LEDs+Buzzer Test In QC mode.

since 01-0B command still is NOT stabilized.

2.Fixed F0-F4 Error Issue.

-C03

25 Jun 2018

25 Jun 2018 goofy.liu

1.Using 2C-20 to test MSR function both in Production Mode & QC Mode.

-C02

22 Jun 2018

22 Jun 2018 goofy.liu

1.Production mode: S/N Injection after All Test Done.

Remove S/N Inject before Tamper Test.

2.[QC mode] Secure Info Check Update (Certificate and Keys Info, TransArmor CA Cert Check)
3.[QC mode] Add Transarmor Certificate Check

Root CA;Interm CA;Key CA;

4.[QC mode] Add LCD/LED/Buzzer Check.

Approved w/ FW Build: 0119.S

Requirement E-mail:

V 1.00.004

-C01

01 Jun 2018

01 Jun 2018 goofy.liu

1.Fixed Tamper Log Can't display Issue @ Production Mode
2.Add Cert List Info @ QC Mode. For Example:

[Installed Certificates Info (NEO 2.0 or later version)] = 00 0A 0B 0C 0D 14 15 16 17 18 19 1B 1C

Root CA

Device CA

Secure Content CA

TMS CA

Data Key KDH CA

Device Certificate

FW Auth Certificate

MFG Commands Certificate

Secure Message Certificate

TMS Server Certificate

Data SKDH Auth Certificate

Application Auth Certificate

Data SKDH Enc Certificate

3.Update Removal Sensor Check method

Old: Check the return value of 04-22 + 02 = 0x01 if pressed

New: Check the return value of 04-22 + 02 = 0x02 if pressed

Approval in FW Build 0131.S

4.Fixed SWT-415
5.Change Ethernet Ping Test method.

old: used VB.Net Ping Class, this might cuase PC use ICMPv6 w/o ICMPv4

new: using windows "ping.exe -4 -w 500", indicated ICMPv4

6.Move "Config Setting check" from FW Info to the isolated item

"Settings" both in Production mode

& QC mode.

+ "Settings" button @ Production mode

+ "Settings" button @ QC mode

7.Move "Security Information Check" @ QC mode from FWInfo Item to

the isolated item "Secure Info"

+ "Secure Info" @ QC mode.

8.[Note] In case of ..

During Tamper Gen CSR (90-02) inside Tamper Test Scneario,

if IDG Cmd Rxing timeout -->

display error without tamper log check.

Please use QC mode to check tamper log if any.

9.[Bug Fixed]

During USB-HID Interface test, if no USB-HID connection found,

back to RS232 will caused Infinite Loop.

10.Secure Info Check Update

P/N - Check Injected Keys

----------------------------+-----------------------

IDVV-580801 - LCLKEK

IDVV-580821 - LCLKEK

IDVV-581801P - LCLKEK

IDVV-581821P - LCLKEK

IDVV-581821PD - LCLKEK; KEYDUKPT;

V 1.00.003

-C06

12 Apr 2018

12 Apr 2018 goofy.liu

1.For 90-02 Gen CSR/Enable Tamper Failed Case @ Production Mode

old scenario: ignore error status

new scneario: Error in Tamper Test Item.

2.Engineer + QC Mode,

Remove invalid Test Item "Buzzer"

3.Remove QC/OQC mode Start Connection

w/ issuing 04-09 command.

4.In QC mode,

to remove re-power on step @ USB-HID Test item.

FW Build Version Verified: 0096.S, 0107 Test

-C05

31 Mar 2018

31 Mar 2018 goofy.liu

FW Build:0096S

1. Add Delay+Ping(1/sec) up to

5~4 secs after Repower on steps

@ Production Mode Tamper Test.

@ Back to RS232 re-linking during USB Intf Test.

2.Production Mode +Device Reset prelogue @ Connection
3.Part Number Update

+IDVV-581821PD, Demo Version,

Customized Settings = IDVV-581821P

-C04

26 Mar 2018

26 Mar 2018 goofy.liu

V1.00.003-C04, 2018 Mar 26

1. Remove LCD test item @ QC mode

Effect P/Ns:

IDVV-580801, IDVV-580821

2. Add 04-09 delay time up to ...

old : 10 seconds, being allowed in QC + Production

new : 20 seconds, being allowed in Production ONLY

-C03

15 Mar 2018

15 Mar 2018 goofy.liu

1.Fixed UI Information by Language Selection.
2.Finetune test steps and remove useless parts.
3.Remove CL EMV L2 Tags info (03-02 response) check in QC/MFG-OQC mode.
4.Remove LEDs+Buzzer Test in QC mode, Non-SRED Part Number.
5.Remove LED , and Buzzer Test Items in QC mode

-C02

09 Mar 2018

09 Mar 2018 goofy.liu

1.MFG OQC mode, specialized by Cmd Arg line set. config by "/MFG_OQC=ON;OFF"
2.if RS232 connectivity w/o USB Connection,

Tamper Test Scenario w/o USB Device Live Monitor Thread.

3.Add S/N 10 digits length check.

Note01 - MFG-OQC, for MFG QC Test under UMFG mode..

What's the MFG- OQC mode.

It’s the QC mode after production but before certificates injection. NEO 2.0 platform ONLY

Test items are almost same as Production mode except setting change (ex: Time/RTC).

FW:

VP6300 FW v1.00.000.0054.S

v1.06

Mindy's Check w/ Errors

RE TS172 VP6300 V1.00.003-C02 Released - Update.msg

-C01

Internal Test

06 Feb 2018

06 Feb 2018 goofy.liu

1.+Battery Tamper Detection

2.Update Tamper List Info

3.Update Part Number features.

IDVV-580801, No SAM, Non-SRED, No Removal Sensor
IDVV-580821, SAM, Non-SRED, No Remvoal Sensor
IDVV-581801P, No SAM, SRED
IDVV-581821P, SAM, SRED

4.Date/Time Test : Time Zone Update

old = GMT/UTC + 08:00

new = GMT/UTC + 00:00

since NEO 2.0 Certificates Injection Tool

sets UTC +00:00 as standard time in the reader.

Old Time zone may cause Time Check Error in QC mode.

Note: Also For Allie Lee .MFG SW to Verify Tamper Test Good or Note.

V 1.00.002

-C01

Internal Test

25 Jan 2018

25 Jan 2018 goofy.liu

1.+Removal Test @ Test(Production) Mode

2. Tamper Log Update, w/ Position Description for

easier trouble shoopting.

V 1.00.001

-C05.a

02 Jan 2018

02 Jan 2018 goofy.liu

1.Update P/N List , ONLY RS232 interface allowed.

2.Update LCD Test Notification

-----------------------

Skip Removal Test @ Test(Production) Mode

FW 1.00.003.0040.S

-C05

02 Jan 2018

02 Jan 2018 goofy.liu

1.QC mode Functions (DUT in Ready State).

2.MSR test Only in RS232 connection.

Perform 04-0A before MSR start.

Verified FW v1.00.003.0040.S

-----------------------

Skip Removal Test @ Test(Production) Mode

-C04

13 Dec 2017

13 Dec 2017 goofy.liu

1.Fixed LEDs+Buzzer Test issue.

2.Test MSR Interface in UMFG mode.

--<ToDo>--

1.Load Certificate (PKI Web Service).

--> Load LCK-KEK + DUKPT Key (Local).

2.QC mode Functions (DUT in Ready State).

-C03

11 Dec 2017

11 Dec 2017 goofy.liu

V1.00.001-C03 Released

1.MSR Test : Changed Test Mode from SMFG to UMFG.

--<TODO>--

1.Key Injection Note Ready.

==================

08 Dec 2017 goofy.liu

V1.00.001-C03, 2017 Dec 08 Released

1.FW:1.00.003.0029 Verified.

2.MSR Test. during pop-up messge box,

operation must use key inject tool to load these keys ...

LCL-KEK(KSN 01), DUKPT Key (KSN 02, Slot 0)

3.Removal Sensor Done.

Open --> Close (Push the sensor) --> Open

=========================================

V1.00.001-C02, 2017 Dec 07 Released

1.MSR Test. 02-40 --> 02-01, FW:1.00.003.0027

2.Fixed 02-01 response never has Tk3 data issue.

-C01

06 Dec 2017

06 Dec 2017 goofy_liu

V1.00.001-C01

1.Add PKI Web Service for SMFG/UMFG function

+ PKIWeb.dll

V 0.00.003

-C01

01 Nov 2017

V0.00.003-C01, 2017 Nov 01 Released

1.Following Test Items Update

SAM Test, Tamper Test, LCD, LED+Buzzer

2.PCI specialized UMFG Commands are applied in

LCD and LED+Buzzer Test Items.

==========================

Necessary Bin File - w/ Using IAR to programming the Unit Flash.

VP6300 FW For MFG 2017.11.01.msg

V 0.00.002

2017 Aug 14

For Beta 01 Production

-C01

14 Aug 2017

V0.00.002-C01, 2017 Aug 14 Released

1.Tamper Test -

Part II, TM4 Tamper Flags, Byte 1 , B1b0~b3

bit0 -> TM4 Physical Tamper detected

bit1 -> TM4 Voltage Tamper detected

bit2 -> TM4 Temperature Tamper detected

bit3 -> TM4 Battery Tamper detected

Byte 0, B0b0~b3, K81 Tamper Flags

b0 = 0-2; b1 = 1-3; b2=4-6; b3=5-7

Note 01 - Right Clicking Mouse in "0.Start" to allow single item test, otherwise TS will

perform Test Items sequentially.

V 0.00.001

Beta 01 Version

-C04

2017 Aug 08, V0.00.001-C04

1.Support Tamper Test.

-C03

Done Items:

FW Info; MSR; Contact (ICC); Contactless (RFID);

LEDs+Buzzer; LCD; Keypad (2 keys); RTC;

TODO Items:

SAM; Tamper;

Ship Setting; (Admin + Data) Key Injection;

Correct P/N.

...

80154001-TI

Version	Date	Comment
Rev E
Unsigned.docx	29 Jan 2021	goofy.liu RFID Test New Type B Card;Test;CTLS type B;CT 5V/3V. P/N = 80005222-001 ICC Test Card P/N 80005221-001
Rev D	09 Nov 2020	goofy.liu Major Updated – TQM-Audit Test Standard 1.RFID Test 1.1 Subtest 01 : Type A(0cm + 4cm) Subtest 02 : Type B(0cm + 4cm) 1.2 Type B Card, Item Number in Arena = N/A. 2.ICC Test 2.1 Test Items :Get ATR + APDU Exchange 2.2 ICC Test Card Item Number = 80005206-004
Rev C_Signed	04 Jun 2019	goofy.liu 1.TQM Test Request Updated.
Rev B	14 Sep 2018	goofy.liu
Rev A - V03	26 Sep 2018	26 Sep 2018 goofy.liu Removal Sensor Test OFF on VP6300 since PCI's report.
Rev A - V02	14 Sep 2018	14 Sep 2018 goofy.liu Update UI Screenshoots.
Rev A - V01	19 Mar 2018	19 Mar 2018 goofy.liu +MFG-OQC Mode Content Index Update
Rev 50.pdf	12 Feb 2018	12 Feb 2018 , goofy.liu Revision 50 Initial Version

Image Version, Secured Type	USB-HID 's PID =
SRED	0x4440
Non-SRED	0x4441
Non-SRED, Non-USAT	0x4442
Non-SRED, USAT	0x4443

Firmware Image Download Link

VP6300 FW Images

DL Link

Version

Date

Comment

Approval Report E-mail

P/N List

A.Key Features(KF) Shorten Name:

-SAM = No SAM

-TAMPR = No Tamper (Non-SRED)

+TransA-RI = + TransArmor Certificates (Root,Interm, No Key)

R = Root; I=Interm; K=Key

V 1.02.007

TE-823

-C01.zip

09 Jul 2021

1.New P/N:
IDVV-580801PD-KT : (#), B.1, -SAM, LCL-KEK, DEK, Encryption Mode Set/Check, +TransA-RI
IDVV-581821PD-KT : (#), B.2, LCL-KEK, DEK, +TransA-RI
2.New TransArmor Injection QC mode check
IDVV-580801 : (#), +TransA-RI
IDVV-580801-C1 : (#), +TransA-RI
IDVV-580821 : (#), +TransA-RI

IDVV-580801P : (#), +TransA-RI
IDVV-580801CP : (#), +TransA-RI

IDVV-580801PD : (#), +TransA-RI

Note:
(#) = PKI901 Required before QC mode check

V 1.02.006

-C03.zip

04 Nov 2020

1.[RFID Test] Update Card Removal Delay to extend the DUT slow response.

old: 1 sec

new: 2 sec

-C02.zip

03 Nov 2020

1.RFID Test Frozen issue fixed

Sol: Removed invalid command F0-F9 Legacy Cmd (LCD Clear)

-C01.zip

22 Oct 2020

Visa-TQM Audit MFG test issue : No Type A CL Card Test.

Resolve: RFID Test Updated , Type A+Type B : 0cm+4cm Tests

old: Type A : 0cm+4cm , 2 sub-steps.

new: Type A+B : 0cm+4cm , 4 sub-steps.

Requested SQA JIRA:

Jira Legacy

server	ID TECH - JIRA
columnIds	issuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	5c72af4b-e2b8-3562-b028-6bcef8f5fab0
key	TE-432

V 1.02.005

-C03.zip

09 Jun 2020

1.Disable - Summary Log Shows Up Automatically

old: Auto Pops up Summary Log after ALL Test Items Passed.

new: Manually open Summary Log File by Mouse Right-Clicking Test Window's Top Tab (Prodction Mode/QC Mode/QC-US mode)

Mindy Yang 22 Jun 2020
RE VP6300TS172 V1.02.005-C03 Released.msg

-C02.7z

03 Jun 2020

1.Fixed Summary Log Can't Display Issue.

Note: Backward Read Line.File < File.Size

Mindy Yang 03 Jun 2020
RE TS172 V1.02.005-C01 + PKI901 V 1.01.007-C06 Released.msg

-C01.7z

03 Jun 2020

Ex: Summary-202062-IDVV-580801PD_QC-US.log

1.P/N List Updated

[+] IDVV-580801P, TDES, MSD/MSR On, EMV On

2.Summary Log (.\Logs\Summary\XXX.log) being Supported.

V 1.02.004

-C02.7z

11 May 2020

1.P/N List

[M] IDVV-580801-TL, Script File Check

mode scope : [QC]+ [QC-US]

Adding DFEE38(08) + 5F2A(0949) Checks in System Groups...

group scope: 00, 80, 90, A0, B0, C0, D0,

Mindy Yang 12 May 2020
RE VP6300TS172 V1.02.004-C02 + PKI901 V1.01.007-C03 Released - Updated V04.msg

-C01.7z

02 May 2020

RE VP6300 New PN application .msg

1.+P/N List

1.1 [+] IDVV-580801-TL,

QC mode : Global TLVs Checks, Turkish Languages+Currency.

A. Set Turkish Language: Change tag DFEE38 to “08”

B. Set Turkish Currency: Change tag 5F2A for all groups and AIDs to “0949”.

1.2 [+] IDVV-580801-C1 : Non-SRED, -SAM, -TAMPR, LCL-KEK

V 1.02.003

-C01.exe

02 May 2020

1.[UMFG] Set S/N 90-10 Improvement

old: 90-10 + S/N 10 bytes + padding 0x00 5 bytes

--> Response V2 Code : 0x22, Failed and Retyring

--> 90-10 + S/N 10 bytes

--> Response V2 Code : 0x00, done

new: 90-10 + S/N 10 bytes

--> Response V2 Code : 0x00, done

2. Move RS232/Keypad (System Rebooting) Items test order backward

old: LCD --> RS232/Keypad (System Rebooting) --> Time check --> S/N, UMFG

new: ICC --> RS232/Keypad (System Rebooting) --> LEDs + Buzzer --> LCD ...

3. Advanced / Detail V2 Status Code Information, S/N relatives

Set S/N : 90-10 (UMFG), Response V2 Status

0x22 -

Get S/N : 12-01 Response V2 Status

0x0A

0x21

V 1.02.002

-C01.7z

14 Jan 2020

Approved firmware:

VP6300 USAT FW v1.01.068.0330 Test

VP6300 USAT FW v1.01.079.0387 Test

1.Serial Number Input Checking Improvement.
@ 952T123456 --> okay.
@ 9T2323 --> Error Code: -1,
cause: The S/N length must be 10 chars.

@ 9520123456 --> Error Code: -2,
the 4th char must be Upper case Alphabet. Here is a invalid digit type char "0"

@ 952t123456 --> Error Code: -2, 't' is lower case alphabet, not upper case one.

@ 952TT23456 --> Error Code: -3, Only the 4th char is Upper case alphabet. Other chars are numeric.

@ 954T123456 --> Error Code: -4, "54" > "53", it's invalid.

@ 900T123456 --> Error Code: -5, "00" < "01", it's invalid.

2.[Fixed] Chinese & English Message , No Translation, [Cancel by User],
3.[Fixed Issue][Engineer Note]
Remove 04-09 command, in QC mode.
Remove this modification in the future :
"shorten solution: + issuing 04-09 in [RS232+Keypad].QC mode's end to restore 2C-20 Response in normal.", V1.01.010-C02 added

--------------------------

4.[Fixed Issue][Engineer Note][Warning]

<Root-cause : poll mode changed in certain firmware version

old : auto poll

new: poll on demand.

<Test scenario:

old :

[QC mode] Set Poll on demand --> Native Test Commands --> Set Auto Poll mode --> done.
new :
[QC mode] Native Test Commands --> done.

<Update Auto Poll behaviors in the following test items....
4.a [QC mode]ICC Test
4.b [QC mode]Keypad Test
4.c [QC mode]LEDs Test
4.d [QC mode]LCD Test

RE VP6300TS172USAT V1.02.002-C01 Renew..msg

SHA-512: ACFE18301CE6E4F1138848878EFCB0527FC4DBA62AE1BFAA170E90D4AF369DF9E1D98EE700E9A70EF547B752D343995FCBB735488C72FD505122FEBD53E94B33

V 1.02.001

-C02.7z

10 Sep 2019

1.Fixed No DUKPT Key (DEK) Check @ QC-US mode in the following P/N list.

IDVV-580809CP-US

RE TS172 VP6300 V1.02.001-C02 Released.msg

SHA-512: 94395767A8A6D87F711BDDEB32DBD46CBC5115E4D4AA3373130E3B67433E33D1F4AAB8D3661DBDE08EF956CB84B2D92B22446D7A721D1BD00E0A7904F0BDED26

-C01.7z

09 Sep 2019

Verified FW Info:

VP6300 FW v1.00.068.0384.T

USB Boot Loader Version : 31 2E 31 33, 1.13

1.Added QC-US mode. For Data Key Injected DUT check status.
2.Removed Send Data Portion in the following UMFG commands.

90-00,90-02,90-04,90-05,91-08,92-00,92-04.

3.Added DUKPT Key (DEK) Check @ QC-US mode in the following P/N list.

IDVV-581821P

IDVV-580809CP-US

IDVV-581801P

~~IDVV-581801CP~~ → IDVV-580801CP

Note: Difference (QC,QC-US): Data Key(DEK) is checked (DEK) at QC-US mode but NOT at QC mode.

V 1.01.012

-C01.7z

15 Aug 2019

1.Temp for IDVV-581821P, Roy.PE.MFG Request.

Issue: No Tamper Test Function.

-----[Note 01 for software programmer, Keywords Definition]-----

SREKeyword = ".S Prod" / ".S Test" / ".T," / ".S,"

ID TECH standard products with keys include ITP, TLP and NGA products.

- SRED / Production - [Major].[Minor].[Build].[Platform].S

- SRED / Test - [Major].[Minor].[Build].[Platform].T

- NSRED / Production - [Major].[Minor].[Build].[Platform]

- NSRED / Test - [Major].[Minor].[Build].[Platform].D

USAT VP6300

- SRED / Production - [Major].[Minor].[Build].[Platform].S Prod

- SRED / Test - [Major].[Minor].[Build].[Platform].S Test

- NSRED / Production - [Major].[Minor].[Build].[Platform] Prod

- NSRED / Test - [Major].[Minor].[Build].[Platform] Test

RE TS172VP6300 V1.01.012-C01 Released.msg

SHA-512: 55F955F36A7AEF355A3408BE45E33EE90CF0FC97DDC98DB9C104BEF6AFF8BE6BFA1F028D0D4711B35741626991561287E52C9DBA4515F7BBBA595D581E5E0E9F

V 1.01.011

-C03.7z

23 Jul 2019

RE VP6300TS172 V1.01.011-C03 Released.msg

1.Updated RS232+Keypad Test Item @ QC mode.

Retrying Times

old: 3

new: 1

2. P/N Updated

old: IDVV-580909CP

new: IDVV-580801CP

SHA-512:

DF3D07BD54B77A6D4A94E3194E28DE54A156BCEE0CF771FE9B5E55FBFD66E93B1961484AB46E8D89E63C0C23D942A05DEC8501F4C372097FBCC770000C57D528

Kate Hung Approved

-C02.7z

23 Jul 2019

1.Updated RS232+Keypad Test Item @ QC mode.

If P/N = "IDVV-580...P???", this is Non-SRED + Encryption Required model.

It's must be set encryption mode after PKI process.

old behaviors:

04-09

new:

04-09 --> C7-36 Set --> C7-37 get & check

-C01.7z

22 Jul 2019

1.Updated P/N List

[+] IDVV-580801CP, -SAM, LCL-KEK, DEK, +TransA-RI

+ QC mode's "Settings Check" item.

For Encryption Mode ON Check : "C7-37", response = 0x03 (EMV+MSR/MSD ON)

[M] IDVV-580801PD, IDVV-580909CP-US.

old: No Encryption mode Set/Check

new: C7-37 Check.

+ QC mode's "Settings Check" item.

For Encryption Mode ON Check : "C7-37", response = 0x03 (EMV+MSR/MSD ON)

Note: Needs PKI901 to enable Non-SRED DUT's Encryption Mode.

V 1.01.010

IDVV-580801 : Non-SRED,-SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED, -SAM, LCL-KEK, DEK,
IDVV-580821 : Non-SRED, -TAMPR, LCL-KEK,

IDVV-580909CP-US :Non-SRED, -SAM, LCL-KEK, *9600

Intf: 1st - USB-HID, 0ACD:4443; 2nd - RS232,9600 bps,8,N,1;

IDVV-581801P : SRED, -SAM, LCL-KEK, +TransA-RI
IDVV-581821P : SRED, LCL-KEK, +TransA-RI
IDVV-581821PD : SRED, LCL-KEK, DEK, +TransA-RI

-C02.7z

18 Jul 2019

RE VP6300 USAT TS172 V1.01.010-C02 Released.msg

1.Updated P/N List

1.1 old P/N: depending on Part Number ISO document.

IDVV-581909CP-US :B.3, -SAM, LCL-KEK, *9600

since 581XXX... --> where "1" = SRED,

new P/N:

IDVV-580909CP-US :B.3, -SAM, LCL-KEK, *9600

since 580XXX... --> where "0" = Non-SRED

2.Fixed MSR Item Issues.

2.a 2C-20 response frame only stays in 4 bytes (B1 + B2 + CRC1 + CRC1 ) due to [RS232+Keypad] QC Mode test.

shorten solution: + issuing 04-09 in [RS232+Keypad].QC mode's end to restore 2C-20 Response in normal.

2.b 2C-20 Response Never Cleanup Issue.

Issue: Test Passed (2C-20 passed) --> No Disconnection

--> DUT has other tests or L2 behaviors --> If 2C-20 response invalid or failed

--> check point (A) --> 2C-20 passed since previous resp info (Tk data + Tk status) is reserved.

Fixed: To clean up all 2C-20 response data info at the beginning of MSR Test.

Kate Hung 18 Jul 2019

-C01.7z

17 Jul 2019

---< Verified FW Version >---

1.USAT-S

VP6300 USAT-S FW v1.01.059.0318.S Test

USB Boot Loader Version : 31 2E 31 37, 1.17

2.USAT

VP6300 USAT FW v1.01.068.0330 Test

USB Boot Loader Version : 31 2E 31 37, 1.17

---<Updated Items>---

1.Updated RS232 + Keypad Test function.

1.1 wakeup delay time

old: 4000 ms

new: 6000 ms

V 1.01.009

-C02.7z

27 Jun 2019

FW Version: VP6300 FW v1.00.058.0364.DTest , WorldNet
1.Fixed LEDs+Buzzer Issues.

Now all VP6300 serials using same LEDs' test patterns.

-C01.7z

21 Jun 2019

1.Updated MSR Test.
1.a Added 2C-20 Track 1~3 Status Info in the MSR Test Result. (Done, 2019 June 20, goofy.liu)

------[Reader]------

MSR Card type = Other

(Bit 0) Tk1 Decode : Okay

(Bit 1) Tk2 Decode : Okay

(Bit 2) Tk3 Decode : Okay

(Bit 3) Tk1 Data : Found

(Bit 4) Tk2 Data : Found

(Bit 5) Tk3 Data : Found

Field 10 -optional bytes length : N/A

1.b Removed 28-01 Antenna ON before MSR Test On.

This is temporarily removed since production MSR Test Failed up 90% and needs HW/ME/SW performing

advanced analysis.

V 1.01.008

-C01.7z

18 Jun 2019

VP6300 Verified FW Version String List.txt

1.Automatically Add/Remove Tamper Test depending on FW Info String of SRED(.S) or Non-SRED(.D or N/A).

+ Tamper Test has been added back to the P/N:IDVV-581909CP-US.

Mindy Yang 19 Jun 2019

RE VP6300TS172 V1.01.008-C01 Released - Updated Info V02.msg

V 1.01.007

-C03.7z

05 Jun 2019

1.RS232+Keypad test updated.

old: 1 second wait after rebooting & RS232 connecting

new: 4 seconds wait after rebooting & RS232 connecting

-C02.7z

05 Jun 2019

1.FW Version Updated

Adding C7-3A Get DRS Check.

Check Item List:

(A) TM4 Checksum Value Verification.

(B) K81 Self Check Verification.

Production Mode: (A)

QC Mode: (A)+(B)

-C01.7z

04 Jun 2019

--<FW Version List>--

VP6300 SRED : Build 0192

VP6300 Mon-SRED : Build 0192

VP6300-USAT SRED: Build 0318

1.Tamper Test & Check Process Update

old: C7-3A missed check (1) K81 Self-Check Error (2) TM4 Check Value (3) No Source Data Display (ex:00,01,FE, etc.)

new:

(a)All new checks for (1)+(2)+(3)

(b)Ignored Item List. VP6300 SRED products.

b.1 TM4 Removal Sensor.

2.Tamper Test & Check.

Being Removed in the P/N:IDVV-581909CP-US

3.FW Info, Boot loader Version Display Updated.

Old: "Boot Loader Version: ASCII Info"

New: "Boot Loader Version: Hex, ASCII Info"

Since Arena FW Build:0192 must be used in Binary Format, Not ASCII Type.

4.[TQM] ICC Test.

New Test Scenario:

If APDU Exchange 2C-13 Execution Failed (since UMFG mode DUT doesn't support before FW Build:318),

the DUT is VP6300-USAT type, then TS ignores the error.

This is for shorten solution VP6300 production request by Freddy.

Suggested Valid Date: 2019 July End.

V 1.01.006

-C01.7z

03 May 2019

1.TQM Request Supported

1.A RFID Test : 0cm+4cm

1.B ICC Test :

old: Insert Contact Type 02 Card --> GetATR --> Remove Type 02 Card --> Done

new: Insert Contact Type 02 Card --> GetATR --> APDU Information Exchanges --> Remove Type 02 Card --> Done

2.[Roy's Request]

LCD 700 ms+ sliding Wait Duration in the other pixels full image.

This is LCD Spec Limitation !!

Ans: Add 700ms delay between LCD Display Pixels Full ON-OFF

3.[Roy's Request]

RS232 + Keypad Test. Sometimes RS232 (PING Command) Failed.

old :

USB -->

DCP (500 ms) -->

Toggling to RS232 by Retrying 3 times PING Commands -->

Okay & Device Ready --> KeyPad Test --> Back to USB and Ping --> Done

ToDo:

USB -->

Delaying Certain Period (DCP, 2k ms) -->

Toggling to RS232 by Retrying 10 times PING Commands -->

Okay & Device Ready --> KeyPad Test --> Back to USB and Ping --> Done

Ans: New Method Done

4.File Info Version Consistency Check with ReleaseNote.txt
5.UI Items Text Minor Changes.

(a)1st dialog box settings (Startup Dialogbox UI)

RS232 Items Display.

Language Items Display.

6.Test Item Updated

[FWInfo]

old:

1.17

new:

USB Boot Loader Version : 1.17

7.[QC Mode][FWInfo]

Excluded(OFF) Global TLVs @ QC mode.

This is limitation of firmware design.

Reported by Chingwei. Now the FW sets up the L2 Pool after certain EMV L2 Keys installation.

8.MSR Test Scenario Updated.

old scenario:

2C-20 --> MSR Swipe --> Done

new :

28-01, Antenna ON --> 2C-20 --> MSR Swipe --> 28-01, Antenna OFF --> Done

This is for the MSR Failed Issue in case of slowly swiping and turn ON the Antenna.

Mindy Yang 03 May 2019
RE TS172VP6300USAT-S V1.01.006-C01 Released.msg

V 1.01.005

IDVV-580801 : Non-SRED,-SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED,-SAM, -TAMPR, LCL-KEK, DEK
IDVV-580821 : Non-SRED, -TAMPR, LCL-KEK,
IDVV-581801P : -SAM, LCL-KEK, +TransA-RI
IDVV-581821P : LCL-KEK, +TransA-RI
IDVV-581821PD : LCL-KEK, DEK, +TransA-RI
IDVV-581909CP-US : -SAM, LCL-KEK,

Intf: 1st - USB-HID, 0ACD:4443; 2nd - RS232,9600 bps,8,N,1;

-C03.zip

06 Mar 2019

RE TS172VP6300USAT-S V1.01.005-C03 Released.- V02.msg

USAT FW: 0299.S

1.PN List Updated.

1.A - Rename USAT's Part Numbers

[-] IDVV-580801-US, removed.

[-] IDVV-581801P-US, removed.

[+] IDVV-581909CP-US, added. . No TransArmor CA RI.

SHA-512:AD5D3E48791D08DD5DED383AD99ED20454FE7147E2D5B52594ED5A4D0A2305B0D773D6EF2B7507219EFEF8E82205F49B3488109063EB7941B9697E0F9C4476B7

-C02.zip

15 Feb 2019

15 Feb 2019 goofy.liu

1.Updated RS232 Interface Test, for VP6300 USAT-S

To Waiting DUT onto sleep mode then Ping/RS232 to DUT again.

IDVV-580801PD

2.P/N List Updated for Cmd F0-F7.

Please read VP6300 USAT-S Supplyment.

IDVV-580801-US -- LEDs Bottom x 4
IDVV-581801P-US -- LEDs Bottom x 4

-C01.zip

24 Jan 2019

24 Jan 2019 goofy.liu

1.PN List Updated.

(+) IDVV-581801P-US: -SAM, LCL-KEK, +TransA-RI, Intf: 1st - USB-HID, 0ACD:4443; 2nd - RS232,9600 bps,8,N,1;

2.+ 09-01 parser now supports Product Type of USAT-S.
3.Ignores Reboot behavior in the RS232+Keypad Test.

Verified in FW VP6300 USAT-S FW v1.00.000.0280.S Test.

V 1.01.004

IDVV-580801 : Non-SRED,-SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED,-SAM, -TAMPR, LCL-KEK, DEK
IDVV-580801-US : Non-SRED,-SAM, -TAMPR, LCL-KEK, Intf:1st - USB-HID, 0ACD:4442, 1+63 bytes(report id); 2nd - RS232,9600 bps,8,N,1
IDVV-580821 : Non-SRED, -TAMPR, LCL-KEK,
IDVV-581801P : -SAM, LCL-KEK, +TransA-RI
IDVV-581821P : LCL-KEK, +TransA-RI
IDVV-581821PD : LCL-KEK, DEK, +TransA-RI

-C03.zip

10 Jan 2019

10 Jan 2019 goofy.liu

1.Remove F0-F9 LCD Clear Command to prevent from LCD Test Failed (No Pixels ALL ON).

This comes by Fixed JIRA Issue behavior.

Later the FW Team will add an unlock command (provide by Robin).

2.Fixed QC Mode Settings Check Issue.

Contact Terminal Data Checking..

Old: DFEE1E --> Terminal Configuration.................. = 50 9C 20 F0 C2 0E 16 00

New, Correct: DFEE1E --> Terminal Configuration.................. = D0 9C 20 F0 C2 0E 16 00

Approved FW: 0270.Test USAT Version.

Mindy Yang10 Jan 2019
RE VP6300USAT TS172 V1.01.004-C03 Released.msg

SHA-512: A2F766B866B456E38EDA5D57B870536A09BBD03FA80F47A781BC0BA1076DABB17F57DF64FC9E08CADA22296E93D8325263702DE561A8EBFA0B89283BD765254E

-C02.zip

08 Jan 2019

08 Jan 2019 goofy.liu

1.Fixed IDVV-581XXXP QC Mode, + Check TransArmor Root + Interm Certs
2.Improved Internal Data Files Reference Path methods.

(PartNumber, ReleaseNote.txt, InstallNote.txt, Local.txt, Logs)

3.Improved FWInfo-Product Type(09-01) Supported

3.A Shorten Solution if VP6300 has no 09-01 (0x0A) supported

--> Passed if Product Type N/A.

3.B (+) New Product Types

VP5300M = 56 33 01

VP6300 USAT = 56 34 01

-C01.zip

07 Jan 2019

07 Jan 2019 goofy.liu

1.Added Supported PID(s)

(+) PID = 4442, USAT ONLY,

2.P/N List

(M) IDVV-581801P : +TransA-RI

V 1.01.003

IDVV-580801 : -SAM, -TAMPR, LCL-KEK,
IDVV-580801PD : Non-SRED,-SAM, -TAMPR, LCL-KEK, DEK
IDVV-580801-US : Non-SRED,-SAM, -TAMPR, LCL-KEK, 1st :USBHID,2nd: RS232 +Baudrate = 9600 bps, Y-Cable ONLY
IDVV-580821 : -TAMPR, LCL-KEK,
IDVV-581801P : -SAM, LCL-KEK
IDVV-581821P : LCL-KEK, +TransA-RI
IDVV-581801P : LCL-KEK, DEK, +TransA-RI

-C05.zip

28 Dec 2018

28 Dec 2018 goofy.liu

1.Start UP Dialog Box (Form) Message Display Updated.

Old : All IDVV-5XXXXX ==> [Warning] "Please make sure to Unplug USB Cable !"

New : IDVV-580801-US (USAT) ==> [Warning] "Please make sure to Plug-In USB Cable !".

Y-Cable ONLY !!

Others IDVV-5XXXXX ==> [Warning] "Please make sure to Unplug USB Cable !".

Mindy Yang28 Dec 2018
RE VP6300TS172 V1.01.003-C05 Released.msg

-C04.zip

24 Dec 2018

24 Dec 2018 goofy.liu

1.P/N List Update

IDVV-580801-US, Please Explore ReleaseNote.txt

-C03.zip

21 Dec 2018

21 Dec 2018 goofy.liu

1.Updated Tampered Test.
2.Updated IDVV-580801-US QC mode Settings Check item.

901 - PKI901 Configuration Loader After PKI process

-C02.zip

19 Dec 2018

19 Dec 2018 goofy.liu

1.P/N List Updated

1.a IDVV-580801PD : Non-SRED, LCL-KEK, DUKPT Key(DEK)

1.b +IDVV-580801-US: Non-SRED, LCL-KEK, RS232 baudrate = 9600 bps

1.b.1 + Contact L2 Configuration Get Check in QC mode.

Note: PKI901, IDVV-580801-US performs Contact L2 Configuration Set & Check
IDVV-580801-US_CFG.zip - Used by TS, (i.e. Convert CT L2 config files into Tx/Rx Script files)
IDVV-580801-US_CFG_CT_L2.zip - Used by CT L2 Tool

-C01.zip

13 Dec 2018

13 Dec 2018 goofy.liu

1.+P/N

IDVV-580801PD : Non-SRED, LCL-KEK, DUKPT Key(DEK)

--<Note>--

Add P/N List if there is/are updated P/N Info.

V 1.01.002

-C01.zip

19 Nov 2018

19 Nov 2018 goofy.liu

1.Add TransArmor Certs Check @ VP6300 following P/Ns QC Mode.

IDVV-581821P

IDVV-581821PD

TransArmor Cert Download Tool Link

2.Installed package.

old = Setup file.

new = Zip file.

Mindy Yang20 Nov 2018
E-mail.msg

V 1.01.001

-C01

26 Sep 2018

26 Sep 2018 goofy.liu

1.Removed Removal Sensor Test in All Part Numbers since PCI lab perfers to ignore them.
2.Always Performing 90-07+90-00 after tamper test on both Production & QC modes.

Also fixed certain incorrect tampered inforamtion display.

Mindy Yang26 Sep 2018

V 1.00.007

-C01

22 Aug 2018

22 Aug 2018 goofy.liu

1.Add USB Unplugging information before start connection.

This informs operator to unplug usb cable before test start and

preventing UUT from falling into suspend/sleep mode to interfere

the TS running.

Mindy Yang 06 Sep 2018

V 1.00.006

-C01

13 Jul 2018