Table of Contents |
---|
Notes - Item | Date | Comment |
---|
004 - 3350 ( |
DUT) + EVK Fixture (BTH) |
| Test Scenario Provider : Robinl (FW, Taoyuan) Learning : goofy.liu Training Course - Online Link:
----[Detail Steps]---- 0. Test Environment Equipments List 0.1 Fixtures: EVK DA14580 as BT Host, =BTHost, USB HID to PC 0.2 DUT: 3350, =BTDev, USB HID to PC 0.3 PC, Win 8/10 0.4 Send Data = Tx, Recv Data = Rx 0.5 –(Air)– = Over BT Connection 0.6 Ref Materials
1.Test Scenario *Using 3350 BT Random Address to connection BTHost – PC : Get FW Version of BTHost, make sure BTHost Ready DUT – PC : Ping, Get BLE Address (BLAddr), Set PIN = 654321, Default Friendly Name(DFN) → Get PIN and check BTHost - PC : Ask BTHost Connect to DUT (BLAddr,PIN) . DUT –(Air)– BTHost – PC : PC send IDG Ping & Buzzer over BTHost (By pass) to DUT then retrieving response in reverse way. BTHost - PC : Disconnecting from DUT → BTHost Rebooting 2.Setting BLE Address, Friendly Name (IDT3350_#####), and default PIN Friendly Name Ex: IDTECH-VP3350-12345 prefix = IDTECH-VP3350 S/N last 5 digits: 12345 | ||||||||||||
001 - BT Test Flow Discussion | ()目的: 針對產線測試生產的需求, 要 BTF 進行整合TS測試, 以求生產測試順利. 想跟你請教下 關於Bluetooth測試治具的技術問題. (B)定義,Abbreviation: BTF = AVNET.COM Bluetooth Test Fixture & Software / Lib / SDK TS = 璟昇 (IDT)生產測試軟體 DUT = IDT 的生產測試產品 MAC = Bluetooth MAC Address. (C)BT Running Steps. 1.TS selects BTF Interface(RS232 Port#,Baudrate) 2.TS pings BTF , checks presentation. TS -- BTF 3.TS asks DUT to prepare stuffs(Get BLE Mac Address, Rebooting, and so on) TS -- DUT 4.TS asks BTF (control mode) to scan DUT (MAC), by BLE Air. TS – BTF … DUT 5.If Found DUT by BLE Air, send/receive certain commands over the BLE communication. TS – BTF – DUT Then TS – BTF … DUT, BTF disconnects comm from DUT 6.Test Done. | |||||||||||||
002 - BT Test Flow 2 |
| |||||||||||||
003 - NEO 2 IDG Commands update |
|
Download List
Item | date | Comment |
---|---|---|
Table of Contents |
---|
Notes - Item | Date | Comment |
---|---|---|
001 - BT Test Flow Discussion | (A)目的: 針對產線測試生產的需求, 要 BTF 進行整合TS測試, 以求生產測試順利. 想跟你請教下 關於Bluetooth測試治具的技術問題. (B)定義,Abbreviation: BTF = AVNET.COM Bluetooth Test Fixture & Software / Lib / SDK TS = 璟昇 (IDT)生產測試軟體 DUT = IDT 的生產測試產品 MAC = Bluetooth MAC Address. (C)BT Running Steps. 1.TS selects BTF Interface(RS232 Port#,Baudrate) 2.TS pings BTF , checks presentation. TS -- BTF 3.TS asks DUT to prepare stuffs(Get BLE Mac Address, Rebooting, and so on) TS -- DUT 4.TS asks BTF (control mode) to scan DUT (MAC), by BLE Air. TS – BTF … DUT 5.If Found DUT by BLE Air, send/receive certain commands over the BLE communication. TS – BTF – DUT Then TS – BTF … DUT, BTF disconnects comm from DUT 6.Test Done. | |
002 - BT Test Flow 2 |
| |
003 - NEO 2 IDG Commands update |
|
Download List
Item | date | Comment |
---|---|---|