CP210x_Universal_Windows_Driver.zip

27 Aug 2018 goofy.liu

USB-CDC Driver.

usb → Comport.

Default baudrate: 115200

C01.zip

30 Oct 2018 goofy.liu

• 1.Fixed BLE Address Test problem.

S/N check --> FW Check since S/N Empty in Production Line.

• 2.+ICC Test.

NoICC-C01.zip

30 Oct 2018 goofy.liu

• 1.Fixed BLE Address Test problem.

S/N check --> FW Check since S/N Empty in Production Line.

• 2.No ICC Test since PCB problem.

-C03.zip

25 Oct 2018 goofy.liu

• 1.Temporarily Removed ICC Test since PCB board problem.

This is DA version.

-C02.zip

19 Oct 2018 goofy.liu

• 1.Add Push [Reset] Button in QC mode startup.

Remember that must waiting “Green LED ON” then push [OK] to next step.

• 2.QC mode BLE Test update.
• 3.Add Friendly Name as “VP3310-5 digits of S/N”

Ex: “VP3310-01234”

• 4. Add BLE Firmware Info Check

Ex:

[BLE Module Fw Info] = 01 06 01 01

Silicon Type Idx : BM71

--<To Do, Next Release>--

1.Output S/N,BLE Address in cvs file format. To allow PE to printout QR code after Production mode PASSed.

file name = SN-BLEAddr.cvs

2.Setup BLE Pairing PIN overwhelming the default PIN. TS V 1.00.002-C02 sets up the UUT w/o PIN.

Note: default PIN is not allowed used since PCI definitions.

RE VP3310TS187 V1.00.002-C02 Released.msg

19 Oct 2018 Mindy Yang

-C03

30 Aug 2018 goofy.liu

• 1.[Bluetooth,BLE] Add Retry in BLE Jig Communication.

FW 0192.SRED

-C02

28 Aug 2018 goofy.liu

• 1.Update LEDs+Buzzer Test.
• 2.Update BLE Test Info.

FW 0182.SRED

-C01

27 Aug 2018 goofy.liu

Product Name: VP3310 , Bluetooth.

1.Initial Version

PCI SRED Production, NEO 2.0 platform

2.+ P/N

IDMR-PBT70100TEBD,

  VP3310, Demo Version

  a.Installed IDT Standard Certificates.

  b.Injected Keys : LCL-KEK; DEK; PEK;