Table of Contents |
---|
Objective Application
- Felica L1 Test
- Mifare L1 Test
Description & Usage
This SDK is used to test Felica Card Reader Test by Poll For Token IDG Commands.
Function | Comment | Run Steps |
---|---|---|
A | Set Test Rounds of Poll For Token | 1 |
B | Connection & Start test | 2 |
C | Stop Test Rounds & Close Connection | 3 |
D | Logging Windows | N/A |
Document
Item | Description | ||||||
---|---|---|---|---|---|---|---|
| This is new IDG Command format Provide a new preselect card type in Tx data (A,B,C, and combination of them) |
Download Link
Version | Update Info | Approved |
---|---|---|
V 1.00.002 | ||
1.Customized Docklight Logs Loading Allowed. Ex: Key word = "[TX] - " /// 1. Enable Pass-Through mode [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 01 00 01 01 1D 19 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 00 1C 9B /// 2. Poll for token [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 02 00 02 0A 14 E3 51 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 05 03 D3 AC 5A E3 2D 39 /// 3. Mifare auth (2C-06) [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 06 00 08 01 01 FF FF FF FF FF FF 4B C8 [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 00 1C 9B /// 4. Mifare Read Blocks (2C-07) [TX] - 56 69 56 4F 74 65 63 68 32 00 2C 07 00 02 33 10 3F 8F [RX] - 56 69 56 4F 74 65 63 68 32 00 2C 00 00 30 87 19 00 00 78 E6 FF FF 87 19 00 00 00 FF 00 FF B7 1A 00 00 48 E5 FF FF B7 1A 00 00 00 FF 00 FF 88 19 00 00 77 E6 FF FF 88 19 00 00 00 FF 00 FF 4C D2 ---------- 2. Time Limited Setting, Customized Script. Docklight Log Like. ---------- 3. Script Example. key word = "[TX] - " Format : "[TX] - 56 69 56 4F 74 65 63 68 32 00 2C 02 00 02 00 14 06 6B" Key word = "[TX] - " V2 Header = "5669564F746563683200" Cmd Set = "2C02" Tx Dat = "0014" Trim the tail 2 bytes (CRC) = "066B" | ||
/POLLFORTOKENTYPE=MIFARE --> indicatee Mifare Test Method.
old = 100 new = 50
FW Build:VP3300 USB NEO v1.01.054, VP3300 USB-C Type | ||
V 1.00.001 | ||
Update 2C-02 command to meet new firmware. | FW: VP3300 USB (Legacy: Goose Run, VP4880) | |
V 1.00.001-C02, 2017 Nov 07 1.Replace "X" with "." | ||
V 1.00.001-C01, 2017 Nov 03 1.Initial Version | ||