Versions Compared

Old Version 234

changes.mady.by.user goofy.liu

Saved on

compared with

New Version 235

changes.mady.by.user goofy.liu

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

80152001-TI

VersionDateComment

Rev F

80152001-TI-Rev F_VP5300_Signed.pdf

 goofy.liu

80152001-TI-Rev E.docx

 goofy.liu

Rev D_20210317.pdf


Rev D_20210317.docx

 

goofy.liu

Rev D

 

goofy.liu

Major Updated – TQM-Audit Test Standard

  • 1.RFID Test

1.1 Subtest 01 : Type A(0cm + 4cm)

Subtest 02 : Type B(0cm + 4cm)

1.2 Type B Card, Item Number in Arena = N/A.

  • 2.ICC Test

2.1 Test Items :Get ATR + APDU Exchange

2.2 ICC Test Card

Item Number = 80005206-004

Rev C.

 

goofy.liu

  • TQM Test Updated

Rev B.docx

 

goofy.liu

  • Remove USDK-PKI as auxiliary usb-connectivity tool.
  • USB Cable connection is only used during USB-HID test.

Rev A.docx

 

goofy.liu

+ USDK-PKI as Auxiliary Software to keep USB-HID connection on.

Rev A.docx

 

  • goofy.liu
  • + S/N Injection Update
  • + Tamper Test
  • + TransArmor CA Certificates Check
  • + Antenna Board+Cable Test P/N.

Rev A , 2018 April 10

TI-Rev A_VP5300_0410.docx

 

goofy.liu

+ Lan LEDs Check.

Rev A

TI-Rev A_VP5300.docx



Rev 50

80152001-TI-Rev 50_VP5300.pdf


, goofy.liu

Revision 50

Initial Version

Image Version, Secured Type

USB-HID's PID =

SRED

0x4450

Non-SRED

0x4451


VP5300 Image Download Page

VP5300 Firmware Images

 

TS Screenshot

Ui expand
titleTS Screenshot


TS ModeScreen shot

Production Mode

UUT in UMFG mode, S/N, MAC, (and EMV L2 setting change?)

MFG-OQC Mode

UUT in UMFG mode, no setting change

QC Mode

UUT in SMFG mode , w/ Installed Certs & Secure Keys



Part Number Configuration Information

VersionDateComment

#003

 

goofy.liu

(plus)Non-SRED Model Numbers

SPTP2-988-33-2C(D)-EC-N, No Removal Sesnor, No Tamper,

#002

goofy.liu

(plus) 80152001-003, VP5300 with 32 MB, production version(with Gate)

(plus)80152001-005, VP5300 with 32 MB, production version(without Gate)

       QC     Keys:  S_RKI, S_PAIR.               Tool: Key Injection for Universal Device V1.09

           Certs: TACertx2.                    Tool: PKI901

       QC-US  Keys:  S_RKI, S_PAIR, S_DEK.        Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09

              Certs: TACertx2.                    Tool: PKI901

--------------------------------

(plus)80152001-004, VP5300 with 32 MB, demo version(with Gate)


(plus)80152001-006, VP5300 with 32 MB, demo version(without Gate)

       QC     Keys:  S_RKI, S_PAIR.               Tool: Key Injection for Universal Device V1.09

     Certs: TACertx2.                    Tool: PKI901

       QC-US  Keys:  S_RKI, S_PAIR, S_DEK.        Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09

              Certs: TACertx2(Demo).                    Tool: PKI901

#001

 

goofy.liu updated, initial version

NEO 2.x MFG Test Flow

step 01 - Assembly Production Test.

step 02 - PKI Process (PKI001,PKI002,PKI003, PKI90X), Certificates & Keys Installation.

step 03 - QA Test.

=========================================

--<PN List>--

[Abbreviation]

(#) = VP5300's Antenna Cable Test ONLY. Using Deactivated/Activated reader as DUT.

(Production) or (Production - SRED)

(P) = Production version

(PS) = Production version - SRED

(D) = Demo version : PKI Certificates + Secure Keys are demo version of IDTech Global's.

(DS) = Demo version - SRED.

TACertx2 = Trans Armors Certificates (Root-Intern).

TACertx3 = Trans Armors Certificates (Root-Intern-Key).

S_RKI = RKI-KEK.

S_PIN = Pairing PIN Key, Reader.

S_PIN_PAD = Pairing PIN Key, KeyPad (Ex: L100).

S_DEK = Data Encryption Key.

----------------------------------------------------------------------------------------

(P)(#)ID-80152002-001: RFID + (Buzzer,LEDs), No Any Certificates , and Keys Checking.

(P)(#)ID-80152002-002: RFID + (Buzzer,LEDs), No Any Certificates , and Keys Checking.

(P)(#)ID-80152002-003: RFID + (Buzzer,LEDs), No Any Certificates , and Keys Checking.

(PS)SPTP2-988-33-2C-0C: S_RKI, S_PIN, S_DEK, TACertx2

(PS)SPTP2-988-33-2C-0C-J1: S_RKI, S_PIN, S_DEK, TACertx2

(DS)SPTP2-988-33-2CD-0C: S_RKI, S_PIN, S_DEK, TACertx2


DL List - Hardware / Lab Test Version

VersionDateCommentApproved

V 1.03.002




-C02.HWMode.zip

 

1. Objective: Tap Card One Time , don't care Type A/B.

   HW/EE Tony Requested RFID Test.

Run Mode = Engineer Mode (run EngineerVersion.bat)

===[Simple User Guide]===





DL List

Ui expand
expandedtrue
titleDL List


Ui tabs


Ui tab
title2024


VersionDate / Git-hashCommentApproved / Keywords

V 1.04.006


SWT-1283

TE-2390


See V1.06.006-C02 


See V1.04.006-C01, 


V 1.04.005


TE-2365

SWT-1261


See V1.04.005-C01 , 


V 1.04.004


SWT-1228

TE-2309


See Sec. V1.04.004-C01 of


See

  , Sec. V1.04.004-C01



Ui tab
title2023


VersionDate / Git-hashCommentApproved / Keywords

V 1.04.003


SWT-1195

TE-2231

FW 093.444.S / .T


See

  , Sec. V1.04.003-C01

V 1.04.002


SWT-1099

SWT-592

TE-2049, for PAE

TE-2048, for New Model Number

Customer Ticket

TS-33837



See Section V1.04.002-C11


See   Section V1.04.002-C09


See   Section V1.04.002-C08


See Section V1.04.002-C07


V 1.04.001


SWT-846

TE-1559


 

See  Section V1.04.001.

SRED+Demo  #[FWInfo] = VP5300 FW v1.02.101.0444.T

SRED+Prod  #[FWInfo] = VP5300 FW v1.02.101.0444.S

NSRED+Demo #[FWInfo] = VP5300 FW v1.00.002.0482.D

NSRED+Prod #[FWInfo] = VP5300 FW v1.00.002.0482


V 1.03.006


TE-1507


 

See Section "V1.03.006-C03".

SWT-819

TE-1537

 

See "2023 Mar 14" Section of

Used Firmware Image:

Frmw;K81;NEO2.0;VP5300;non-SRED;v1.00.002.0482.D; Demo

Frmw;K81;NEO2.0;VP5300;non-SRED;v1.00.002.0482;   Production

SWT-818

 

See "2023 Mar 03" Section of

Used Firmware Image:

Frmw;K81;NEO2.0;VP5300;non-SRED;v1.00.002.0482.D; Demo

Frmw;K81;NEO2.0;VP5300;non-SRED;v1.00.002.0482;   Production

SWT-798

Non-SRED;

SPTP2-988-33-2C(D)-EC-N;

No Removal Sensor;

No Tamper Check;




Ui tab
title2022


VersionDate  / Git-hashCommentApproved by

V 1.03.005




 

1.Updated Model Numbers

 [M] SPTP2-988-33-2C-EC

     <PKI-TS/Configuration Mode>

       A.Removed ADF File(s) and No ADF Loading Steps.

       B.To disable ADF mode, Issuing "C7-C7" + “FF00" .

       

     <QC/QC-US Modes>

       [Secure Info]

       Removed ADF Checks

 [M] SPTP2-988-33-2C-EC-J1, Production Version

     <PKI-TS/Configuration Mode>

      A.Removed ADF Files and No ADF Loading Steps.

      B.Send "60-18" with data “01” to switch the external V1.20.038 EMV L2 CT kernel 

               "60-17" Response to check "01", CT/IFM EMV L2 kernel

               Ex: Using "09-20" to Get Response involving "CT L2, EMV Common Gen 2 L2 ..."

      C.To disable ADF mode, Issuing "C7-C7" + “FF00" .

    <QC/QC-US Modes>

       [FWInfo Item]

        See "09-20" Response which contains "CT L2, EMV Common Gen 2 L2 ..."

        

       [Secure Info][New Rules Accomandate All Model Numbers]

        A. Removed ADF File(s) and No ADF Loading Steps.


V 1.03.004




 

 1.Updated Model Numbers

  + x_NonSRED.16MB.SPTP2-988-33-2C-0C, 16MB, Non-SRED, Standard

  + x_NonSRED.32MB.SPTP2-988-33-2C-0C, 32MB, Non-SRED, Standard

  


 

2022 July 9, goofy.liu

V1.03.004-C02 Released for Non-SRED Test

 1.Fixed Non-SRED Version Test Items Coverage Issue

 FW: VP5300 FW v1.00.002.0482.D


 

V1.03.004-C01 Released for Non-SRED Test
 1.Model Number Updated
 +x_NonSRED.16MB.SPTP2-988-33-2CD-0C, 16MB, Non-SRED
    - No Tamper Eanble + Check Test
    - No Removal Sensor Test
    
 +x_NonSRED.32MB.SPTP2-988-33-2CD-EC, 32MB, Non-SRED
    - No Tamper Eanble + Check Test
    - No Removal Sensor Test

For TE-1263


V 1.03.003




 

1. Part Number List Updated

   (+)SPTP2-988-33-2C-EC-J1, same as SPTP2-988-33-2C-EC

     - TransArmor Certs Importing.

     - ADF File Importing.

     - 32MB model.

    

2. Change Run Mode:

    - Native: PKI901-CFG

       New: Configuration Mode

    - Configuration Mode Info Display.

        @ Start Up TS Mode Selection Window

        Ex: 

      Configuration Mode:

          - ADF App Importing,

          - System Config, IDG Commands Setting

          - TransArmor Cert List

          - UpdateIDT.Cmp Log File

          

    -Effected P/N.

     ALL P/Ns

   

3. TimeCheck Update, 

    - QC Mode ONLY

    - Ask User to allow the Time Diff Value more than tolerance.

       - Select 'Yes', 1 time only and keep ignoring the error, but have logged info.

       - Select 'No', 1 time only and acts as normal error process.

    -Effected P/N.

     ALL P/Ns

     

4.ADF Installation Check Issue

    -If No ADF file importing in "Configuration Mode", QC mode Must not check ADF Installation.

    -Effected P/N.

     ALL P/N except "SPTP2-988-33-2C-EC",and "SPTP2-988-33-2C-EC-J1"


V 1.03.001





<Git-hash>
968ebe3971d92783c155f5e7e9ad696d0b0b2d13
</Git-hash>



 

  • 1. Part Number List Updated

  + SPTP2-988-33-2C-0C-I1


V 1.03.002, Deprecated


Deprecated

Jira: TE-1029


 

  • 1. Update Communication Interface Selection
       - Major = RS232, 115200,8,N,1.
       - Minor,Added = USB-HID.
         Used by Test Item "USB-HID", and Run Mode(PKI901-CFG) Recommended.
  • Note for Communication Test Interfaces Updated
       Major = RS232, 115200,8,N,1.
       Minor = USB-HID. Used by Test Item "USB-HID", and Run Mode(PKI901-CFG)
       Effected P/N Scope :
         - ALL Part Numbers Except thoes ID-80152002-* ones.
           
       Effected Run Mode :
         - Production, RS232
         - QC,         RS232
         - QC-US,      RS232
         - PKI901-CFG, USB-HID Recommended
           Objective: 
            - Limited MFG Configuration Loading Cycle Time.
            - Haste ADF App Loading. Request by MFG PE Roy.

After PKI901-CFG Run Mode Selected, Interface USB-HID  is automatically selected.


 

  • 1. Part Number List Updated
      + SPTP2-988-33-2C-0C-I1
        Noted: Certificate "Secure Message" , 0x17, are added during PKI Process.
  • 2. Test Interfaces Changed, MFG PE Roy requested for PKI901 run-mode.
       Major = USB-HID
       Minor = RS232, 115200,8,N,1 - Only in Test Item "RS232".
       Effected P/N Scope :
         - ALL Part Numbers
       Effected Run Mode :
         - Production
         - QC
         - QC-US
         - PKI901-CFG



Ui tab
title2021


VersionDate  / Git-hashCommentApproved by

V 1.03.001


TE-914, w/ FW v1.02.093.444

-----------------------------

TE-834


  •   1.[QC mode] ADF installed App Check Sub-Item at Secure Info Item

　　1.A Effective Part Number Scope:

          1.A1 _AppLoadingTest,  ONLY for 32MB Demo Unit.

               QC Mode

               QC-US Mode

           1.A2 SPTP2-988-33-2C-EC,  ONLY for 32MB Productio Unit. 

               QC Mode

              QC-US Mode

  

  • Ex01, of Passed Case:
    ------[ADF App Installation Check]------
    [ADF App List]
    #01 : OK : app0_helloworld.signed.bin
    [DevNote, App, 64 bytes]
    #01 = 46574150000001000000C005FFFF3F00A8F5C00598F5C0050000000014000000FFFF9F00FA25C10500006070E0016070E0016070E01A607080B584B000AF7860
    [DevNote, App, Reader : C7-C7 0301, Resp=1+64*N,]
    64 bytes*N = 46574150000001000000C005FFFF3F00
    A8F5C00598F5C0050000000014000000
    FFFF9F00FA25C10500006070E0016070
    E0016070E01A607080B584B000AF7860

  • Ex02, of Failed Case:
    ------[ADF App Installation Check]------
    [ADF App List]
    #01 : Rdr N/A : app0_helloworld.signed.bin
    [DevNote, App, 64 bytes]
    #01 = 46574150000001000000C005FFFF3F00A8F5C00598F5C0050000000014000000FFFF9F00FA25C10500006070E0016070E0016070E01A607080B584B000AF7860
    [DevNote, App, Reader : C7-C7 0301, Resp=1+64*N,]
    64 bytes*N = FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

2.[Developer's Notes]
 2.A Suggestion:
   Using 256 bytes-sized App ADF/SDK bin file(s) for QC verification ONLY (First 64 bytes used ONLY, Cmd: C7-C7)
   Path :in QC\CFG and QC-US\CFG folders
   Disadv: Hard to management files !!

 2.B ADF File List
 Ex:
   .\_AppLoadingTest\PKI901-CFG\CFG\app0_helloworld.signed.bin
   .\_AppLoadingTest\QC\CFG\app0_helloworld.signed.bin
   .\_AppLoadingTest\QC-US\CFG\app0_helloworld.signed.bin


  • 1.Fixed Issue.

Checking ADF loading failed with wrong keywords in dual log files comparison.

Part Number Scope:

    SPTP2-988-33-2C-EC

===[For Developer notes]==

1.json | ADF Log Files Checking Update.

  1.A Checking Log File Entry Point Keywords 

     json = ViVOconfig > Started loading profile to device... <== Entry Point

  ADF = 

       12:19:24.484  ADF APP Sent block 296 of 296 <== Entry Point

  1.B NG Check Rules

  json = 

    "fail" --> <> "Remove all Configuration Groups failed"

  ADF = 

    "err" --> !"no err" --> NG


  • 1.Fixed PKI901-CFG Issues

   ==> Fxied ADF App Loading Failed Problem.

   

  • 2. Adding up Delay Time After ADF Enable/Disable Unit Rebooting Up.

 old: 8 seconds

 new: 10 seconds, more stable


  • 1.+ Supporting Run Mode: PKI901-CFG, 
      Objective: To be instead of PKI901 tool. From TS V1.03.001-C01
      PartNumber Scope :
        ALL, but except ID-80152002-001~003.
     
      *Deprecated Tool: PKI901.
       

  • 2.+New Part Number
      2.A SPTP2-988-33-2CD-EC, Demo Key, TA Certs(Root+Interm)


  • 3.PAE ADF App Loading Support
      PartNumber Scope, 32MB only:
      3.A SPTP2-988-33-2C-EC. 
  •  
    4.Supporting 16/32MB Check in QC mode
     Project Scopes: ALL Part Numbers
     Note.Flash Size Info Get Cmd :
     4.A QC Mode Supported
      Tx:09-15 + 01
      Rx:09-XX + 01 01 08 : 8MB
           10 : 16MB
           20 : 32MB
           80 : 128MB
     4.B From Firmware Version:
      FW v1.02.087.0444

V 1.02.002


ID TECH - JIRAissuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolutionkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-699


  • 1.Adding Flash Size Check.

The Rest Legacy Part Numbers must have Flash-16MB Check.

Part Number Scope:

[M](PS) SPTP2-988-33-2C-0C:   Flash-16MB Test Item

[M](PS) SPTP2-988-33-2C-0C-J1:Flash-16MB Test Item

[M](DS) SPTP2-988-33-2CD-0C:  Flash-16MB Test Item

--------------------------------

[M] 80152001-003:             Flash-32MB Test Item

[M] 80152001-005:             Flash-32MB Test Item

--------------------------------

[M] 80152001-004:             Flash-32MB Test Item

[M] 80152001-006:             Flash-32MB Test Item



  • 1.ReleaseNote.txt Updated

old : Key_RKI

new : Key_LCL_KEK


  • 1.P/N List Updated

[+] SPTP2-988-33-2C-EC, VP5300 with 32 MB, production version(with Gate)
       QC     Keys:  Key_LCL_KEK, Key_PAIR.               Tool: Key Injection for Universal Device V1.09
               Certs: TACertx2.                             Tool: PKI901
       QC-US  Keys:  Key_RKI, Key_PAIR, Key_DEK.          Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09
               Certs: TACertx2.                             Tool: PKI901 
[+] New Test Item: Flash Size 32MB Check @ Production Mode.
               QC Mode doesn't support this command.
-----------------
[+] SPTP2-988-33-2CD-EC, VP5300 with 32 MB, demo version(with Gate)
       QC     Keys:  Key_RKI, Key_PAIR, Key_DEK.          Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09
               Certs: TACertx2.                             Tool: PKI901
       QC-US  Keys:  Key_RKI, Key_PAIR, Key_DEK.          Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09
               Certs: TACertx2(Demo).                       Tool: PKI901
      
[+] New Test Item: Flash Size 32MB Check @ Production Mode.
      QC Mode doesn't support this command.



V1.02.001


ID TECH - JIRAissuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolutionkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-593


  • 1.MSR Test 2C-20 issue @ VP5300 FW v1.02.011.0428.T

1.a Shorten 60-14 timeout waiting.

1.b Don't Plug-in L100 until L100 Test start.

1.c remove Note02 Test Scenario


1.MSR Test, specialized for 

2C-20 issue @ VP5300 FW v1.02.011.0428.T 

Note: 2C-20 issue has been fixed @ VP5300 FW v1.02.011.0432.T

Note02:

  Test Scenario: DUT stays in Deactivated mode

  

  FD-49, CL Loopback stop

  90-07(00), Secure Task - Start

  90-07(01), Secure Task - End

  FD-49, CL Loopback stop

  90-07(00), Secure Task - Start

  90-07(01), Secure Task - End

  

  2C-20 , MSR Test Command

  ...


Abbreviations:

TACertx2  = Trans Armors Certificates (Root-Intern).

TACertx3  = Trans Armors Certificates (Root-Intern-Key).

S_LCL-KEK  = LCL-KEK.

S_PAIR   = Pairing PIN Key, Reader.

S_PAIR_PAD  = Pairing PIN Key,with KeyPad (Ex: L100).

S_DEK   = Data Encryption Key.

-------------------------------

  • 1.P/N List Updated

[+] 80152001-003, VP5300 with 32 MB, production version(with Gate)

[+] 80152001-005, VP5300 with 32 MB, production version(without Gate)

       QC     Keys:  S_RKI, S_PAIR.               Tool: Key Injection for Universal Device V1.09

           Certs: TACertx2.                    Tool: PKI901

       QC-US  Keys:  S_RKI, S_PAIR, S_DEK.        Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09

              Certs: TACertx2.                    Tool: PKI901


-----------------

[+] 80152001-004, VP5300 with 32 MB, demo version(with Gate)

[+] 80152001-006, VP5300 with 32 MB, demo version(without Gate)

       QC     Keys:  S_RKI, S_PAIR.               Tool: Key Injection for Universal Device V1.09

     Certs: TACertx2.                    Tool: PKI901

       QC-US  Keys:  S_RKI, S_PAIR, S_DEK.        Tool: USDK-PKI(Demo) / Key Injection for Universal Device V1.09

              Certs: TACertx2(Demo).                    Tool: PKI901

  • 2.[ReleaseNote.txt] P/N List information update
  • 3.[MSR Test Issue] Fixed the issue.

  issue: 61-01 UI Event isn't handled as well.

--------------------

--------------------

Also for ID TECH - JIRAissuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolutionkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-419




Ui tab
title2020


V 1.01.009


---[Requested SQA Test JIRA]--

ID TECH - JIRAissuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolutionkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-419


  • 1.P/N List Update

 (-) ID-80149009-001, Removal, Invalid Part Number



  • 1.P/N List Update
    (a) ID-80149009-001
    Fixed the issue.
    old: RFID Item Excluded
    new: RFID Item Included

1.RFID Test Updated , Type A+Type B : 0cm+4cm Tests

Objective - TQM-Visa Request : 0cm+4cm && CL Type A+B , 4-step items required.



  • 1.P/N List Update
    (a) ID-80149009-001
    Fixed the issue.
    old: RFID Item Excluded
    new: RFID Item Included
  • 2.Update USB-HID Interface Functions, IDT_USB_HID_32bit.dll.
    Ignored UI Event Frame.
    Frame : 45 00 55 ## Len_1B ...
  • 3.Summary Log Shows Up Automatically
    Manually open Summary Log File by Mouse Right-Clicking Test Window's Top Tab (Production Mode/QC Mode/QC-US mode)
  • 4.[Extra] P/N Partially Typing & Auto Matched Patterns Seeking in part number selection.
  • 5.QC-US mode Support. TS checks RKI-KEK + Paring PIN Key + DEK
  • ========[6.Fixed JIRAs]========

6.1 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-476
6.2 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-478
6.3 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-483 Not a bug.
Tip. Right-Clicking Button "Start" Again before running failed item again
6.4 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-491 Disable Button "Done" during tests.


Approval JIRA:

ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-419


V 1.01.009


---[Requested SQA Test JIRA]--

ID TECH - JIRAissuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolutionkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-419


  • 1.P/N List Update

 (-) ID-80149009-001, Removal, Invalid Part Number



  • 1.P/N List Update
    (a) ID-80149009-001
    Fixed the issue.
    old: RFID Item Excluded
    new: RFID Item Included

1.RFID Test Updated , Type A+Type B : 0cm+4cm Tests

Objective - TQM-Visa Request : 0cm+4cm && CL Type A+B , 4-step items required.



  • 1.P/N List Update
    (a) ID-80149009-001
    Fixed the issue.
    old: RFID Item Excluded
    new: RFID Item Included
  • 2.Update USB-HID Interface Functions, IDT_USB_HID_32bit.dll.
    Ignored UI Event Frame.
    Frame : 45 00 55 ## Len_1B ...
  • 3.Summary Log Shows Up Automatically
    Manually open Summary Log File by Mouse Right-Clicking Test Window's Top Tab (Production Mode/QC Mode/QC-US mode)
  • 4.[Extra] P/N Partially Typing & Auto Matched Patterns Seeking in part number selection.
  • 5.QC-US mode Support. TS checks RKI-KEK + Paring PIN Key + DEK
  • ========[6.Fixed JIRAs]========

6.1 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-476
6.2 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-478
6.3 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-483 Not a bug.
Tip. Right-Clicking Button "Start" Again before running failed item again
6.4 ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cSWT-491 Disable Button "Done" during tests.


Approval JIRA:

ID TECH - JIRAkey,summary,type,created,updated,due,assignee,reporter,priority,status,resolutionab5edc62-e688-3f56-bb35-2a58646b026cTE-419




Ui tab
title2019


VersionDate  / Git-hashCommentApproved by

V 1.01.008




  • 1.Added QC-US mode. For Data Key Injected DUT check status.
  • 2.Removed Send Data Portion in the following UMFG commands.

90-00,90-02,90-04,90-05,91-08,92-00,92-04.

  • 3.Added DUKPT Key (DEK) Check @ QC-US mode in the following P/N list.

    SPTP2-988-33-2CD-0C

    SPTP2-988-33-2C-0C-J1

    SPTP2-988-33-2C-0C


V 1.01.007




FW Version: V1.00.051.0338 JJ Mackay Version
FW DL Link:

  • 1.[Tamper Test]

  Ignores "TM4 checksum error" since "TM4 Removal Sensor" chain reaction and it has been verified in [FWInfo] Item.

Note: The Issue is reported by MFG PE Roy.

  • 2.[MSR Test]

 To Added 2C-20 Track 1~3 Status Info in the MSR Test Result @ DUT Info Window (Bottom-Right window).


V 1.01.006




  • 1.[RFID Test]

Fixed TQM Issue 0cm + 4cm in these part numbers : ID-80152002-001~003.

Patrick tested , this TS173 is ok

  • 1.[FWInfo Test]

Display TM4 Error message in the 1st-time pop up window if C7-3A response contains 01 01 xx where xx <> "00" bin value.


[FWInfo] = VP5300 FW v1.00.051.0338.S Test

  • 1.Added Device Reset Failed Check (90-07+90-00) before Tamper Enable(90-02) @ Tamper Check Item.
  • 2.Updated P/N List
      SPTP2-988-33-2C-0C-J1, its test settings = SPTP2-988-33-2C-0C

[FWInfo] = VP5300 FW v1.00.046.0338.S Test

USB Boot Loader Version : 1.10

  • 1.Update FWInfo Test Scenario.

 [+] TM4 Checksum Flag Validation by retrieving C7-3A Responses.

 [+] K81 Self-Check Flag Validation by retrieving C7-3A Response. Being exclusive @ QC mode.

  • 2.P/N List Updated

[+] ID-80152002-003, Antenna Test


V 1.01.005




1.P/N List Updated

[+] ID-80152002-003, Antenna Test


  • 1.Fixed JIRA Issues.

FWVP5300-126

 SPTP2-988-33-2C-0C

   old : TACAT1 , Invalid.

   new : TACAP1

  • 2.Fixed Ethernet Input window display issue.
  • 3.Removed part number selection useless information.
  • 4.Fixed ICC Test Passed Issue w/ Non-Contact Card.



  • 1.Fixed JIRA Issues.

FWVP5300-126

  • 2.Fixed UI Display.

Fixed RS232 Port Settings Display Problem.


  • Firmware Information

[FWInfo] = VP5300 FW v1.00.046.0338.S Test

USB Boot Loader Version : 1.10

  • 1.TQM Request Supported

  1.A RFID Test : 0cm+4cm

  1.B ICC Test :

    ICC Type 01 Card = CLXSU004j4/T=0, phase out

    ICC Type 02 Card = CLXSU064KCS/T=0ED

    old scenario:

      Insert ICC Type 02 Card --> GetATR --> Remove Type 02 Card --> Done

    new scenario:

      Insert Contact Type 02 Card --> GetATR --> APDU Information Exchanges --> Remove Type 02 Card --> Done

  • 2.JIRA Issues:

ID TECH - JIRAab5edc62-e688-3f56-bb35-2a58646b026cFWVP5300-119 

ID TECH - JIRAab5edc62-e688-3f56-bb35-2a58646b026cFWVP5300-120

FWVP5300-121

FWVP5300-122

  • 3.Update Ethernet Test Item: IDG MAC Address Set Command.

    (JIRA issue:NEO 2.0/ NEOII-2040)

    old: D1-16

    new: 90-14,

         UMFG mode: Available

         SMFG mode: N/A

  • 4.Test Item [Configuration Set/Check]

To Turn Off this item since it's useless.


V 1.01.004




  • 1.QC Mode.

Remove the 03-02 command (Global TLVs Check) @ QC001.FWInfo Check since CL L2  Global Data (TLVs) are not ready until Certs and ALL Secure Keys being installed.


  • 1.Improve 09-14 Get HW Ver Info.

+ Retrying time up to 3 rounds for resolving USB-HID done and reconnection back to RS232 interface

09-14 failed problem.

FW Build:0304.S Prod


V 1.01.003




FW: 0304.S

1.Add 09-02 Processor Type(09-02) Support. 0x4E = "N" =  K81 Processor.




Ui tab
title2018


VersionDate  / Git-hashCommentApproved by

V 1.01.002




  • 1.Fixed Issue:

Ethernet MAC Address = 000000000000 check => Failed in QC Mode

Event:  2018 Nov 15, MFG QC Candy Chou Report , QC Mode, "000000000000" being found and TS doesn't have Validation of  MAC Address.

  • 2.Updated LEDs+Buzzer Test Item.

V 1.01.001




  • 1.Update Tampered check rules.
  • 2.Add Device Reset after Tamper Test on both modes (Production & QC)

V 1.00.009




  • 1.Update Tampered check info.

V 1.00.008




1.Add USB Unplugging information before start connection.

This informs operator to unplug usb cable before test start and

preventing UUT from falling into suspend/sleep mode to interfere

the TS running.


  • 1.FW Crashed problem.

1.1 After discussion w/ Kevin Vo. There is one suspected point leading to crash FW,

Observed in TS173 V1.00.008-C03 & VP5300 FW Build:0178.S.

JIRA Issue: FWVP5300-83


90-07 & 12-00 are creation/destruction task commands.

May TS need some delay time after these commands

to have enough time latency for FW task creation/destruction.


Solution: Add 500ms after 90-07 to gaurantee FW Task Creation/Destruction Done.


1.2 Remove 12-00 , 91-08 command.

1.3 Remove Universal SDK and replace it with Plug-in & Plug-out during usb-hid test.

1.4 To move USB-HID item to near the end position except SerialNum item.

    This is preventing from USB-HID crashed possibility.


  • 1.Add 90-07+01 End Secure Task Command to pair up with 90-07+00 Start Secure Task one.

FWVP5300-83

FW Build: 0178.S still rebooted during the TS running.


  • 1.Add USDK_PKI check before invoke to preventing from

DUAL USDK instances.

2.Add Re-power ON Step after Non-S/N Ready UUT 90-02 w/ V2 Code = 0x45.

approved it ..

Environment:

a.FW Build:0178.S

b.Universal SDK-PKI Ver 2018-07-10

-----------------------

  • 1.TS invokes Universal SDK to open the USB-Connection &

close it before [Disconnection].

The Universal SDK - PKI will take care USB-HID Connection.

  • 2.Update Tamper Check Procedure

  - To Ignore Check Resp Code=0x45

    while performing 90-02 w/o S/N.


V 1.00.007




  • 1.Fixed FWVP5300-48
  • 2.SPTP2-988-33-2CD-0C

[-] Removed TransArmor Data Cert Checks
See https://idtechproducts.atlassian.net/wiki/download/attachments/59029483/RE%20VP5300%20TransArmor%20certification%20types.msg?version=1&modificationDate=1533018706554&api=v2

FW Build:0177.S

1.Fixing FWVP5300-48

Tamper Check Item.

old: C7-3D, Get Tamper Logs

new: C7-3A, Get DRS

FW Build: 172.S

  • 1.Fixed Issues

FWVP5300-66, -67

  • 2.Improved LEDs+Buzzer Test.
FW Build: 160.S

  • 1.Part Number Update

[+] ID-80152002-002, Antenna Board ONLY, Black.

Same as ID-80152002-001 Settings

Please use UMFG mode UUT as its fixture !!

Support Production Mode ONLY !!

  • 2. + Test Items in QC mode.

  LCD;

  LEDs+Buzzer;

  Removal Sensor.

  • 3.Improve QC mode Keys Info Verification Procedure.
  • 4.Improved QC mode Trans Armor CA Certificates Check Coverage.
FW Build: 160.S

V 1.00.006




  • 1.Fixed "Secure Info" TA CA Cert Info Display Issue @ QC mode.

old, bad:  TACAT1662579824640

new, correct: TACAT166257982464

Approval on FW Build 0131.S Test

  • 1.MAC Address - Remove Space Chars before Injection.

  • 1.Production mode: S/N Injection after All Test Done.

Remove S/N Inject before Tamper Test.

  • 2.[QC mode] Secure Info Check Update (Certificate and Keys Info, TransArmor CA Cert Check)
  • 3.[QC mode] Add Transarmor Certificate Check

Root CA;Interm CA;Key CA;

  • 4.Part Number Update

[+] ID-80152002-001, Antenna Board ONLY.

5.a - Prepare UUT : the Firmware staying in UMFG / Deactivated mode

5.b - Test Items List : Contactless, LEDs+Buzzer. Other Items are don't-care cases.

5.c - Please use "Production Mode" Instead of "QC mode" to test this item.

Approval on FW Build 0131.S Test


V 1.00.005




1.Use 2C-20 instead 02-40 in QC mode (SRED mode) MSR Test.



V 1.00.004




  • 1.Fixed JIRA Issues

FWVP5300-51: Update Injected Keys Check Rule.

All 5 kinds of installed Keys will be detected automatically.


  • 1.Fixed JIRA Issues

FWVP5300-49: S/N Injection Failed Problem.

FWVP5300-50: Won't Fix since Not a Power-Off-On detection issue.



  • 1.Fixed Tamper Log Can't display Issue @ Production Mode

=========================================

V1.00.004-C04,2018 May 31, Goofy Liu

  • 1.Injected Secure Keys Check Rules Update @ Secure Info Test Item @ QC mode

P/N                          - Check Secure Keys

----------------------------------------------------------

SPTP2-988-33-2C-0C           - LCL-KEK; Paring;

SPTP2-988-33-2C-0DC          - LCL-KEK; DUKPT; Paring;


  • 2.Remove MSR @ QC mode @ SPTP2-988-33-2C-0C

since no DUPKT/Data Key available.


  • 3.Add Cert List Info. For Example:

===========================

[Installed Certificates Info (NEO 2.0 or later version)] = 00 0A 0B 0C 0D 14 15 16 17 18 19 1B 1C

Root CA

Device CA

Secure Content CA

TMS CA

Data Key KDH CA

Device Certificate

FW Auth Certificate

MFG Commands Certificate

Secure Message Certificate

TMS Server Certificate

Data SKDH Auth Certificate

Application Auth Certificate

Data SKDH Enc Certificate


V1.00.004-C03,2018 May 29, Goofy Liu

  • 1.Remove reset to default command during USB-HID/RS232/V-COM connection test.

  • 1.Update Removal Sensor Check method

Old: Check the return value of 04-22 + 02 = 0x01 if pressed

New: Check the return value of 04-22 + 02 = 0x02 if pressed

Approval in FW Build 0131.S.

  • Fixed SWT-415

Removal Sensor FW Update.

  • 1.Change Ethernet Ping Test method.

old: used VB.Net Ping Class, this might cuase PC use ICMPv6 w/o ICMPv4

new: using windows "ping.exe -4 -w 500", indicated ICMPv4


  • 2.Move "Config Setting check" from FW Info to the isolated item

  "Settings" both in Production mode

                   & QC mode.

  + "Settings" button @ Production mode

  + "Settings" button @ QC mode


  • 3.Move "Security Information Check" @ QC mode from FWInfo Item to

  the isolated item "Secure Info"

  + "Secure Info" @ QC mode.


  • 4.[Note] In case of ..

 During Tamper Gen CSR (90-02) inside Tamper Test Scneario,

 if IDG Cmd Rxing timeout -->

 display error without tamper log check.

 Please use QC mode's *Tamper Test* if any.


  • 5.[Bug Fixed]

 During USB-HID Interface test, if no USB-HID connection found,

 back to RS232 will caused Infinite Loop.

Approval on FW Build: 0105.S - Goofy

V 1.00.003




  • 1.Add notification of "Run As Administrator"
  • 2.For 90-02 Gen CSR / Enable Tamper Failed Case @ Production Mode

old scenario: ignore error status

new scneario: Error in Tamper Test Item.

  • 3.Remove QC/OQC mode Start Connection w/ issuing 04-09 command.
  • 4.Add more LEDs checks on LAN’s LED (RJ-45 Socket), Amber+Green.

FW Build: 0100.S being verified.


FW Build:0092.S

  • 1. Add 04-09 delay time up to ...

   old : 10 seconds, being allowed in QC + Production

   new : 20 seconds, being allowed in Production ONLY

  • 2. Add Delay+Ping(1/sec) up to

   5~4 secs after Repower on steps

      @ Production Mode Tamper Test.

      @ Back to RS232 re-linking during USB Intf Test.

  • 3.Part Number List Update

  +) SPTP2-988-33-2CD-0C, Demo Version

  Customized Setting is same as SPTP2-988-33-2C-0C.


1.MFG OQC mode, specialized by Cmd Arg line set. config by "/MFG_OQC=ON;OFF"

2.if RS232 connectivity w/o USB Connection,

  Tamper Test Scenario w/o USB Device Live Monitor Thread.

3.Add S/N 10 digits length check.


Note01 - MFG-OQC, for MFG QC Test under UMFG mode..

MFG-OQC screenshot

What's the MFG- OQC mode.

  It’s the QC mode after production but before certificates injection. NEO 2.0 platform ONLY

Test items are almost same as Production mode except setting change (ex: Time/RTC).

1.Fixed UI Information by Language Selection.

2.Finetune test steps and remove useless parts.

3.Remove CL EMV L2 Tags info (03-02 response) check in QC/MFG-OQC mode.

4.Remove LED , and Buzzer Test Items in QC mode.

Approved FW = VP5300 FW v0.00.001.0069.S

v1.06

V 1.00.002




1.Tamper Test, Add Repower-on step after Tamper Eanble(90-02).

For Battery Tamper Detection.

2.Add Device Reset After Tampered Point(s) Found.

3.Customized Test Items Setting.



[Internal Use ONLY, Temporary for Roy]

1.+Battery Tamper Detection

2.+Removal Sensor Test.

3.Update Tamper List Info

  a. +USB-HID Monitor Thread while Activate Tamper

  b. Update Device Reset Timeout, Up to 5 secs.

  c. QC Mode only performs get Tamper Log, No Device Reset since

     it assumes that UUT stays in Activation Mode.


4.Update Part Number features.

IDVV-580801, No SAM, Non-SRED, No Removal Sensor

IDVV-580821, SAM, Non-SRED, No Remvoal Sensor

IDVV-581801P, No SAM, SRED

IDVV-581821P, SAM, SRED


5.Date/Time Test : Time Zone Update

old = GMT/UTC + 08:00

new = GMT/UTC + 00:00

since NEO 2.0 Certificates Injection Tool

sets UTC +00:00 as standard time in the reader.

Old Time zone may cause Time Check Error in QC mode.


V 1.00.001





FW 0040.S,

1.Add 04-0A Reset in these check points.

1.a After Connection

1.b Before Contactless Test Start.

  - Temporary Solution for 12/26~28 VP5300 production.

1.c Before MSR Test Start.

  - Temporary Solution for 12/26~28 VP5300 production.


Verified FW 0040.S

=========================================

V1.00.001-C05.c, 2017 Dec 27 Released, goofy_liu

--<Major Update>--

1.MAC Addre Input Dialog Box

Always select All Text while poping up the dialogbox.


2.Update P/N, RS232 Connection ONLY.


--<Minor Update>--

1.conditional removed Tamper 1st dialog box (date & time check)

RTC Sync + SerNum-UMFG Injection.


2.Tamper List Loop Update in PASS case.

2.a doesn't close Tamper Table

if TS stays in Single Item Loop Test.

2.b Add Waiting interval between each rounds


3.EngMode - No Buzzer - All Supported.


4.Add AppSleep() in 90-17 --> 90-00 Dev Reset --> 90-17

procedure "TestTM_Common_PCI_SREC_IS_UMFG_Mode()"


5.Remove Eng Mode Log Enable in Productio Mode


6.NEO 2.0 Skips "TimeDate Sync 3 times" in Cleanup steps.



Verified FW 0040.S

=========================================

V1.00.001-C05.b, 2017 Dec 27 Released, goofy_liu

1.FWInfo - Move TM4 version info to the first position.

2.Fixed Admin Key Return value error issue.

3.Buzzer + LED test →  Buzzer control being removed.
VP5300 sounds a Buzzer (@RF Panel) in a period.

Verified FW 0038.S

=========================================

V1.00.001-C05.a, 2017 Dec 27 Released, goofy_liu

1.Remove Load Certs / Load Keys Step after All Test Done.

There are workstations in charge of both steps.

TS doesn't touch the process until new demands found.





Verified FW 0038.S,

=========================================

V1.00.001-C05, 2017 Dec 22 Released, goofy_liu

1.Fixed MSR Test Multiple Responses Issue.


=========================================

V1.00.001-C04, 2017 Dec 22 Released, goofy_liu

1.Buzzer Test Update.--> 90-13 + 05 01/00


2.Skip Removal Sensor Test.0

Verified FW 0038.S


 


=========================================

V1.00.001-C03, 2017 Dec 14 Released, goofy_liu

1.Add MAC Addr Input Item and fixed compare issue

if operator using lower case of MAC Addr Input.


2.Add Loop Item in ICC Get ATR + Get Card Status


=========================================

V1.00.001-C02, 2017 Dec 14 Released, goofy_liu

1.Fixed S/N problem

2.Adding retrying mechanism in FW Info check.


--<ToDo>--

1.Load Certificate (PKI Web Service).

 --> Load LCK-KEK + DUKPT Key (Local)

2.QC mode Functions (DUT in Ready State).



V1.00.001-C01, 2017 Dec 13 Released, goofy_liu

1.Fixed LEDs+Buzzer Test issue.

2.Test MSR Interface in UMFG mode.

--<ToDo>--

1.Load Certificate (PKI Web Service).

 --> Load LCK-KEK + DUKPT Key (Local)

2.QC mode Functions (DUT in Ready State).


V 0.00.004





=========================================

V0.00.004-C01, 2017 Oct 27 Released

1.Update - Form04, production UI Ready.


ToDo:

1.RTC Check, Using UMFG Cmds.

2.Watch Dog Test. Need Firmware Support.

Used FW Info:

  • [ProcessorType] = ARM Cortex-M4/ K21 Family
  • [Hardware Info] = VP5300 HW v0.00
  • [FWInfo] = VP5300 FW v0.00.014

Unknown

  • [Product Type] = VP4880C (NEO)

V 0.00.003





--<ToDo>--

2017 Sept 30 updated

1.Tamper Test - Still Failed ,

    sometimes passed but sometimes failed.

  This needs FW Help.

=========================================

V0.00.003-C04, 2017 Sept 30 Released

  • 1.Fixed by FW, USB Conn: ICC Test - Front Switch Doesn't work.
  • 2.Fixed by FW, USB Conn: RFID Test - 2C-02 Doesn't work.
  • 3.Update Tamper Test Item.
  • 4.Improve RS232 connection, special for USB-VCOM of PC side.


--<ToDo>--

2017 Sept 28 updated

  • 1.USB Conn: ICC Test - Front Switch Doesn't work- 
  • 2.USB Conn: RFID Test - 2C-02 Doesn't work - 
  • 3.Tamper Test - Still Failed , need Kevin Vo's Help.- 

=========================================

V0.00.003-C03, 2017 Sept 28 Released

  • 1.+) Ethernet Ping Test, Ethernet MAC Injection


--<ToDo>--

  • 1.Ethernet Test - Under Dev
  • 2.Tamper Test - Under Debug.

=========================================

V0.00.003-C02, 2017 Sept 27 Released

  • 1.Fixed MSR Test Problem , using 02-40 command
  • 2.+) LED + Buzzer Test
  • 3.Update Contactless / RFID Test Item
  • 4.Update SAM Test Item.


V0.00.003-C01, 2017 Sept 25 Released

  • 1.ViVOpayV3 protocol supported

But VP5300 FW v0.00.012 still has problem in V3.

  • 2.Update ICC/CT Test Items
  • 3.Ethernet Test Item in development.

V 0.00.002





V0.00.002-C02, 2017 Sept 18 Released

  • 1.USB-HID Connection Test Update.
  • 2.MSR Test for Beta01 Test ONLY, MSR Format is NOT standard.


2017 Sept 15,

  • 1.Add L100 Test
  • 2.Add SDRAM Test

V 0.00.001





V0.00.001-C01, 2017 Spet 07,

Initial Version




Ui tab
titleExt01.FW Naming Rule



ProductionDemo
SRED VP5300 FW v1.02.101.0444.S VP5300 FW v1.02.101.0444.T
Non-SRED VP5300 FW v1.02.101.0444 VP5300 FW v1.02.101.0444.D





...